System Description

TD 93025US
9 May 2019 / Ver. I 62
System Description
teleCARE IP
9.6.3 NUWBM3 Wireless Active Bedside Module
The wireless bedside module (NUWBM3-HU) is a wall mounted teleCARE IP wireless
peripheral containing a 916 - 921 MHz RF transceiver. It comes with a spacer and
installation kit for surface mounting.
The NUWBM3 has 3 customizable function buttons with configurable color button inserts
and a magnetic SafeConnect socket. Each button has a customizable color-matching LED
that lights up when pressed, for reassurance. When an (optional) 5 VDC power supply is
used the LEDs are permanently back-lit for easy location in the dark. Based on the chosen
configuration the buttons can activate a normal, assistance, emergency call and a staff
presence.
The wireless bedside module includes a SafeConnect socket for the connection of the
NUHS1B (one-button) handset. A handset connected status LED lights up for a couple of
seconds to indicate that the handset is properly connected. When the bedside handset is
disconnected, a disconnect alarm is generated to inform the staff.
Note: 3, 7 and 14 button handsets are not supported.
The wireless bedside module requires 2 x 1.5V AA Alkaline batteries (not included). An
automatic low battery warning is transmitted if the battery voltage falls below 2.4V. Under
normal circumstances the battery life is approximately two years. Alternatively, a 5 VDC
Class II power adapter (UL approved) can be used. When battery powered the LEDs stay
active for a period of 36 seconds after a call has been made. When externally powered the
LEDs stay active until the call has been cancelled.
The wireless bedside module is suitable for use in senior care homes and other healthcare
facilities.
Figure 55. NUWBM3