System Description

TD 93025US
9 May 2019 / Ver. I 12
System Description
teleCARE IP
3.2 System Overview teleCARE IP Without Speech
The following illustration shows a typical example of a teleCARE IP non-speech system. The options
and system components depend on the specific project requirements.
Figure 3. teleCARE IP system overview without speech
teleCARE IP without speech is designed to work with Ascom Interactive Messaging, which includes
the Ascom interactive handsets and pagers.
The system is configured with the project specific requirements using the teleCARE IP System Manager
(see the teleCARE IP Configuration Manual TD93019US).
3.3 teleCARE IP With Speech
The basic installation for a teleCARE IP system with speech is the same as for teleCARE IP without
speech. To have the speech functionality the room controllers (NIRC3) require a voice piggyback
module (NIVP) and each location where speech is required must have a teleCARE IP speech module
(NISP). The speech module can only be used in combination with the teleCARE IP doorside module
(NIDM), the bedside module (NIBM) and the active pull-cord module (NIPC).
The teleCARE IP Room Display (NIRD) can also be combined with the speech module to give speech
with interactive messaging.
3.3.1 Compatible Ascom IM Handsets
teleCARE IP with speech is designed to work with Ascom Interactive Messaging using the Ascom
handsets which support multi-layer interactive messaging. For a list with compatible handsets, see
“teleCARE IP Compatible Ascom Handsets” on page 8.