System Description

TD 93025US
9 May 2019 / Ver. I 18
System Description
teleCARE IP
5.3 Blank Front Cover for the Room Controller
A blank solid plastic front cover for the room controller is available in gray and white. The blank front
cover is fitted to the room controller in place of the standard front cover with a translucent dome
cover. It is used when there is no requirement for LED lamps on the room controller.
Figure 9. Room controller with blank front cover
5.4 Corridor Lamp (NICL2)
The corridor lamp has the same appearance and has the same signalling function as a teleCARE IP
room controller with integrated corridor lamp.
Figure 10. Corridor lamp (NICL2)
The Corridor Lamp (NICL2) is an active peripheral and has fixed address 5 on the room bus. The Room
Controller (NIRC3) can be the master of up to three NICL2 slave corridor lamps.
The Corridor Lamp consists of a back box, a printed circuit board, a cover plate and translucent dome
cover that can accept up to four LED boards, as shown in the following illustration: