System Description

TD 93025US
9 May 2019 / Ver. I 19
System Description
teleCARE IP
Figure 11. NICL2 - Corridor lamp parts
Note: LED lamp boards are not delivered as part of the corridor lamp and therefore must be ordered
separately.
5.5 LED Lamp Board (NILD2)
The NILD2 contains four high intensity LED lamps which are used in the corridor lamp of the room
controller (NIRC3) and the corridor lamp (NICL2). The three pins on the back of the NILD2 are used to
connect the LED board through holes in the room controller or corridor lamp printed circuit board. The
room controller and the corridor lamp each accept up to four NILD2 Boards.
Figure 12. LED lamp boards: white, red, green, yellow and blue
The LED lamp board is available in five colours: red, green, yellow, white and blue. The LEDs are used
for the signalling of various types of call, as well as staff presence and faults. The functions of the LEDs
are determined by the system setup.
NILD2