System Description

TD 93025US
9 May 2019 / Ver. I 64
System Description
teleCARE IP
The Location of the NIRX on the NITX
The piggyback mounting the NIRX on the NIFX room controller enables wireless
functionality.
Note: The NIFX is delivered with an NIRX mounted from the factory.
Figure 58. The Location of the NIRX on the NITX
Mounting the NIRX on the NILF
If monitoring the LF beacon (NILF) through an RF heartbeat signal is required then the NIRX
must be mounted on the NILF circuit board. The NIRX can also send an alarm upon front
cover removal detection (tamper alarm) or to send a low battery alarm.
Figure 59. Piggyback mounting the NIRX module on the NILF
NIFX
NIRX
(Optional)
NILF
NIRX