System Description

TD 93025US
9 May 2019 / Ver. I 108
System Description
teleCARE IP
Appendix B: Connecting and disconnecting the Safe Release Plug
Connecting the Safe Release Plug
The teleCARE switch modules with socket have a “Red Dot” on the cover plate, at the bottom in the
middle. The safe release plug on the teleCARE hand sets has a corresponding “Red Dot” which must
line up with the red dot on the switch module and face outwards when plugging in the handset.
Figure 91. Aligning the red dots on switch module and the Safe Release plug
The recommended and easiest way to plug the Safe Release plug into the socket is shown in the
illustration below.
Figure 92. Connecting the Safe Release plug into the socket
To plug in the “Safe Release” plug, carefully insert one side of the plug connector into the socket.
Hold that side firmly in place and at the same time, push the other side of the plug up into the socket
until it locks in with a “click”.