User`s guide

Using Added Features to Make Efficient Phone Calls
46
Phoning over a Line Key
You want to make a call via a Line key.
You can make a call via any available Line key using the Operator Console. The call number configured in
the system for the Operator Console is the number transmitted.
Parking a Call Partner on a Line Key
You are connected with your call partner via a Line key and decide to park the party.
You can park your call partner with the current Line key.
Transferring an Exchange Line
You want to transfer an exchange line to an internal subscriber who does not have exchange access.
Not only can you hand over an exchange line, you can also dial the call partner's phone number and
announce him to the call destination required.
Pick up the handset.
Press a free Line key.
You hear the dialling tone. The LED next to the Line key lights up.
Dial the person's phone number: Without exchange prefix.
The call is made via the Line key.
Park Press the "Park" Foxkey.
The call partner is now parked. The LED next to the Line key flashes slowly.
The display shows the "P" symbol next to the call time.
To fetch a call party: Press the relevant Line key.
You are now connected with the person.
Enquiry call In a call with an internal subscriber: Press the "Enquiry call" Foxkey.
The display reads "Enter number".
Press a free Line key.
You hear the exchange signal.
To transfer the exchange line without prefix: Put the handset on-hook.
The internal subscriber has taken the exchange access. The Operator
Console switches to the idle state.
- or -
To transfer the exchange line with prefix: Enter the phone number you want.
Transfer without prior notification: Put the handset on-hook.
The internal subscriber has taken the call. The Operator Console switches
to the idle state.
☛
☛