User manual

TD 92417GB
2009-03-11/ Ver. C
User Manual
Ascom a71 Alarm Tranceiver and Ascom p71 Transceiver
21
9.1.3 Send Data
The data send function can be used for opening a door, starting/stopping a machine etc.
1Press .
2 Select "Messages".
3 Select “Send Data”.
4Use to mark a digit in the virtual digit pad, press to select the digit.
• To insert a digit in the middle of the text string, press "Edit", use to select
where to insert the digit.
• Press "Insert" and insert the digits.
• To remove previous digit, press .
5 Enter data and press “Send”.
9.2 Profiles
It is possible to for the user to define up to five different profiles in the transceiver. Three
profiles are preset at delivery; Normal, Silent and Loud.
1 Enter the menu by pressing .
2 Select “Profiles” and press .
3 Navigate the Profiles list using .
Figure 14.
Figure 13. Profiles list
The profiles are configured in the PDM and can, for example, consist of different ring
signals and volumes. Another example is when several users are sharing the same
transceiver. Each user can then define their own settings, for example; type of ring signal,
volume, soft key settings etc.
9.2.1 Change Profile
To change profile:
1 Select “Profiles” and press . A list with all profiles is shown.
2 Select the profile with .
3Press . The name of the marked profile is shown. The transceiver will
automatically return to the profiles list.
A soft key can be programmed to change profiles, see Configuration Manual for more
information.
OK
C
OK
Profiles
Normal
Silent
Loud
Profile 3
013
OK
OK