User manual

TD 92417GB
2009-03-11/ Ver. C
User Manual
Ascom a71 Alarm Tranceiver and Ascom p71 Transceiver
22
9.3 Services
Twelve different services can be defined in the transceiver. The services are configured in
the PDM, for more information, see
Appendix A: Programming the Transceiver on page
33.
1 Enter the menu by pressing .
2 Select “Services” and press , a list with all created services is shown.
Figure 15.
Figure 14. Services list
9.3.1 Activate a Service
1 Select the desired service in the service list using .
2Press or soft key; to activate the service. If data is sent, the text “Sending” is
shown. The transceiver will automatically return to the list and the selected service
is marked.
9.4 Settings
It is possible for the user to change the settings. The alternatives are; Alert signals, Alarm
settings, Display, Locks, Shortcut keys, General and System.
1 Enter menu by pressing .
2 Select “Settings” and press , a list with the settings options is shown.
3Use to navigate the Settings menu.
Figure 16.
Figure 15. Settings menu
• Alert Signals; change the settings for all audible signals and the vibrator.
• Alarm Settings
1
; turn the alarms on/off.
• Display; change the text size and contrast, turn backlight on/off.
• Locks; select if the keys are automatically locked.
1. The "Alarm Settings" menu is enabled by default, but can be disabled via the PDM, see Configuration Manual, TD
92439GB for more information.
OK
Services
Open
Lab door
Get lab results
Require wheelchair
Lock
Close
014
OK
OK
Settings
Alert Signals >
Alarm Settings
Display
Locks
015