User manual

TD 92417GB
2009-03-11/ Ver. C
User Manual
Ascom a71 Alarm Tranceiver and Ascom p71 Transceiver
24
9.4.9 Set Alarm Data
Alarm data is a string of up to 15 characters (digits) which is sent together with the alarm.
1 Select “Alarm Setting” and press .
2 Select “Alarm Data” and press .
3Use to mark a digit in the virtual number pad, press to select the
digit.
• To insert a digit in the middle of the text string, press "Edit", use to select
where to insert the digit.
• Press "Insert" and insert the digit.
• To remove previous digit, press .
4Press "Save" and "Yes" to save the Alarm Data string.
9.4.10 Change the Message Text Size
1 Select “Display” and press .
2 Select “Text Size” and press .
3 Choose between Large Size, Medium Size and Small Size. Press .
9.4.11 Backlight On/Off
1 Select “Display” and press .
2 Select “Backlight” and press ; the Backlight checkbox is selected/cleared.
9.4.12 Change the Contrast
1 Select “Display” and press .
2 Select “Contrast” and press .
3 Select the desired contrast by using then press “Save” or .
9.4.13 Turn Automatic Key Lock On/Off
1 Select “Locks” and press .
2 Select “Auto Key Lock” and press ; the Auto key lock checkbox is selected/
cleared.
In stand-by mode a locked transceiver is indicated by in the display.
9.4.14 View Shortcut Keys
The keys can be assigned different functions in the PDM. To check which function that is
assigned to the shortcut keys:
1 Select “Shortcut keys” and press .
2 Select a key and press . Information about the assigned function is displayed.
9.4.15 Select Language
1 Select “General” and press .
2 Select “Language” and press .
3 Select the desired language using .
4Press . The language is shown.
OK
OK
OK
C
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK