User Guide

www.tems.com
Ascom Network Testing Inc.
1943 Isaac Newton Square
Reston | VA | 20190-5006 | USA
www.tems.com
06.2009 © Ascom 2009. All rights reserved. TEMS is a trademark of Ascom. All other trademarks are the property of their respective holders. | 287 01-FAP 901 0873 Rev C Uen | Photo: Fotograf Paulina
www.tems.com
LTE FEATURES
Scanner measurements with DRT 4301A
LTE SISO
Reference Signal Received Power
Reference Signal Received Quality
PSCH Detected
PSCH measurements
SSCH measurements
HSPA FEATURES
More than 60 HSPA-specific IEs
HSPA related events
Predefined HSDPA and HSUPA presentation
windows
Application layer throughput
Full decoding of HSPA messages
HS session
HS 64 QAM, 16 QAM, and QPSK modulation
rates
HS CQI
HS UL Happy Rate
DSCH BLER, retransmission rate and
throughput (kb/s)
HS Phy requested, scheduled and served
throughput (kbit/s)
HS UL Average Serving Grant and E-TFCI
HS-SCCH channelization code information
WCDMA FEATURES
More than 300 IEs
Predefined WCDMA-specific presentation
windows
Phone-based scanning: CPICH scan, SIB
decoding, and NW search
Audio quality measurements including
PESQ and Frequent AQM
SQI, SQI-MOS, VSQI and VTQI
Map themes for easy analysis of pilot
coverage, pilot pollution, and missing
neighbors
Scanning and UE based missing neighbor
detection
Decoding of Layer 2 and 3 messages
Serving/active set + monitored/detected
neighbor information
GSM neighbor measurements in WCDMA
Finger information
Intra- and inter-frequency HO information
RLC throughput UL/DL
Transport channel logging
RRC state logging
(UTRA carrier) RSSI
RACH report
UE transmit power
GAN UMA FEATURES
Predefined GAN presentation windows
WLAN Signal Level and RSSI
WLAN Access Point MAC address
Rove-in/rove-out events
Handover between GERAN and GAN
GSM/GPRS/EDGE FEATURES
More than 300 IEs
Predefined GSM-specific presentation
windows
Phone-based scanning
Audio quality measurements including
PESQ and Frequent AQM
SQI and SQI-MOS
Serving + neighbors measurements
C/I per timeslot and C/A measurements
GSM channel verification
Decoding of Layer 2 and 3 messages
WCDMA neighbor measurements in GSM
Hopping information
GPRS protocol messages
Transmit power
Data throughput UL/DL
Block error rate (%) UL
DTX usage
GPRS and EGPRS status and time slot
information
WIMAX FEATURES
More than 50 information elements
Predefined presentation windows
Preamble Scan (5, 10 MHz Bandwidth)
Continuous Wave Scan (10, 12.5, 15, 25,
30, 50, 250 KHz Bandwidth)
MAC Decoding (FCH, DL-/UL-MAP, DCD, and
UCD)
CDMA FEATURES
More than 250 IEs
CDMA-specific events
Predefined presentation windows
PESQ and SQI-MOS
Layer 3 and mode reports decoding
General CDMA information
CDMA mobile and server information
CDMA radio parameters
A/C/N Set information
Follow-phone functionality with scanner
DATA AND SERVICE TESTING
IP protocol trace
Application throughput UL/DL
Session information including current and
mean throughput UL/DL
AQM/PESQ measurements
Streaming video
Ftp, HTTP, Ping test applications
E-mail, MMS, SMS testing
Command sequence for service testing
Note: Measurement capabilities of handsets
vary. TEMS Investigation has functionality that
exceeds that of any one supported handset.
For latest information about our newly sup-
ported terminals, go to TEMS Support from our
main Web page: http://www.tems.com/