User manual
Table Of Contents
- 1. Introduction
- 2. Pre-Installation
- 3. Programming the VoWiFi Handset
- 4. Installation of VoWiFi Handsets
- 5. Maintenance
- 5.1 Handset
- 5.1.1 Configure Spare Handsets without a Number in Large Systems
- 5.1.2 Upgrade Handset Software
- 5.1.3 Upgrade Software OTA via TFTP
- 5.1.4 Upgrade Software via PDM
- 5.1.5 Upgrade Software Over the Air (OTA) via Centralized Device Management (IMS3)
- 5.1.6 Recapture the Earlier Software
- 5.1.7 Upgrade Handset Functionality using License
- 5.1.8 Perform a Factory reset
- 5.2 Replacement of Handsets
- 5.3 Change Number of a Handset
- 5.4 Update Parameters via IMS3
- 5.5 Perform a Security Upgrade via IMS3
- 5.6 Upgrade the Template
- 5.7 Create a Configuration Backup
- 5.1 Handset
- 6. Handset Configuration
- 6.1 Select Network
- 6.2 IP Address Settings
- 6.3 Network Settings
- 6.4 Security Settings
- 6.5 Handset Settings
- 6.5.1 Automatic key lock
- 6.5.2 Phone lock
- 6.5.3 Audio adjustment
- 6.5.4 Headset Configuration
- 6.5.5 In Charger Behavior
- 6.5.6 Configure Profiles
- 6.5.7 Hide Missed Call Window
- 6.5.8 Battery Warning
- 6.5.9 Shared Phone
- 6.5.10 Prevent Handset Switch off
- 6.5.11 Uploadable Language
- 6.5.12 Select Default Language
- 6.5.13 Short cuts
- 6.5.14 Soft Key Functions During Call
- 6.5.15 Import Contacts
- 6.5.16 Company Phonebook
- 6.5.17 Central Phonebook
- 6.6 Messaging and Alarm
- 6.7 Messaging Settings
- 6.8 Alarm Settings
- 6.9 Telephony
- 6.9.1 Endpoint ID and Endpoint number
- 6.9.2 VoIP Protocol
- 6.9.3 Codec
- 6.9.4 Offer Secure RTP
- 6.9.5 Internal Call Number Length
- 6.9.6 Emergency Number
- 6.9.7 Voice Mail Number
- 6.9.8 Message Centre Number
- 6.9.9 Max number of Call Completions
- 6.9.10 Dial Pause Time
- 6.9.11 Direct off Hook from Charger
- 6.9.12 Replace Call Rejected with User Busy
- 6.9.13 Busy on 1 / Disable call waiting
- 6.9.14 Calling Line Restriction
- 6.10 Regional Settings
- 6.11 Display
- 6.12 Menu Operation
- 6.13 Push-To-Talk (PTT) Group Call
- 6.14 Presence Management
- 6.15 Location
- 7. Use Handset to Verify the VoWiFi System Deployment
- 8. Handset Internal Web Administration Page
- 9. Administration
- 10. Troubleshooting
- 11. Related Documents
- 12. Document History
- Appendix A: Working with Templates
- Index
- Contents
TD 92675EN
20 June 2012 / Ver. E
Configuration Manual
Ascom i62 VoWiFi Handset
21
5. Maintenance
Prerequisites: A PDM or Device Manager that supports the move license function, and a
connection to the license server.
To move a license using the PDM:
1 Put the licensed handset in the desktop programmer.
2On the Licenses tab, select the handse
t online.
3On the License menu, click “Move license...”.
4In the Move li
cens
e dialog, select the unlicensed handset and click “OK”.
The handset in the desktop programmer is restarted.
5 Put the unlicensed handset in the desktop programmer.
6On the Licenses tab, select t
he handse
t online.
7On the License menu, clic
k “Refresh”.
The handset in the desktop programmer is restarted.
To move a license using the Device Manager:
1On the Licenses tab, select the licensed handset (m
ust be online).
2On the License menu, click “Move license...”.
3In the Move li
cens
e dialog, select the unlicensed handset and click “OK”.
Both handsets are restarted.
4 If the unlicensed handset is currently shutdown:
• Switch on the handset.
•On the License
s ta
b, select the handset.
•On the License menu, cl
ick “Refresh”.
• The handset is restarted.
5.1.8 Perform a Factory reset
When a factory reset is done on a handset, all conf
iguration settings will be restored to
default values; PBX subscriptions, contacts, messages, downloaded language, certificate etc.
will be removed. The software and licenses will be left intact.
Factory Reset using PDM
1 Open the PDM.
2 Put the handset in the Desktop Programmer (DP1) cradleIn the Device tab, mark the
handset t
o be factory reset. Note that the handset must be online.
3 In the Device menu, select “Factory reset“. Al
ternatively, right-click the handset and
select “Factory reset“.
4A Reset devices window appears, click “Yes“. The hand
set will be restarted.
Factory Reset using Handset
It is possible to factory reset a handset from its Admin menu.
1 To activate the Admin menu, select Menu > Settings and enter 40022.
2 Select “Factory Reset“.
3A Reset porta
ble?
window appears, press “Yes“. The handset will be restarted.