User manual
Table Of Contents
- 1. Introduction
- 2. Pre-Installation
- 3. Programming the VoWiFi Handset
- 4. Installation of VoWiFi Handsets
- 5. Maintenance
- 5.1 Handset
- 5.1.1 Configure Spare Handsets without a Number in Large Systems
- 5.1.2 Upgrade Handset Software
- 5.1.3 Upgrade Software OTA via TFTP
- 5.1.4 Upgrade Software via PDM
- 5.1.5 Upgrade Software Over the Air (OTA) via Centralized Device Management (IMS3)
- 5.1.6 Recapture the Earlier Software
- 5.1.7 Upgrade Handset Functionality using License
- 5.1.8 Perform a Factory reset
- 5.2 Replacement of Handsets
- 5.3 Change Number of a Handset
- 5.4 Update Parameters via IMS3
- 5.5 Perform a Security Upgrade via IMS3
- 5.6 Upgrade the Template
- 5.7 Create a Configuration Backup
- 5.1 Handset
- 6. Handset Configuration
- 6.1 Select Network
- 6.2 IP Address Settings
- 6.3 Network Settings
- 6.4 Security Settings
- 6.5 Handset Settings
- 6.5.1 Automatic key lock
- 6.5.2 Phone lock
- 6.5.3 Audio adjustment
- 6.5.4 Headset Configuration
- 6.5.5 In Charger Behavior
- 6.5.6 Configure Profiles
- 6.5.7 Hide Missed Call Window
- 6.5.8 Battery Warning
- 6.5.9 Shared Phone
- 6.5.10 Prevent Handset Switch off
- 6.5.11 Uploadable Language
- 6.5.12 Select Default Language
- 6.5.13 Short cuts
- 6.5.14 Soft Key Functions During Call
- 6.5.15 Import Contacts
- 6.5.16 Company Phonebook
- 6.5.17 Central Phonebook
- 6.6 Messaging and Alarm
- 6.7 Messaging Settings
- 6.8 Alarm Settings
- 6.9 Telephony
- 6.9.1 Endpoint ID and Endpoint number
- 6.9.2 VoIP Protocol
- 6.9.3 Codec
- 6.9.4 Offer Secure RTP
- 6.9.5 Internal Call Number Length
- 6.9.6 Emergency Number
- 6.9.7 Voice Mail Number
- 6.9.8 Message Centre Number
- 6.9.9 Max number of Call Completions
- 6.9.10 Dial Pause Time
- 6.9.11 Direct off Hook from Charger
- 6.9.12 Replace Call Rejected with User Busy
- 6.9.13 Busy on 1 / Disable call waiting
- 6.9.14 Calling Line Restriction
- 6.10 Regional Settings
- 6.11 Display
- 6.12 Menu Operation
- 6.13 Push-To-Talk (PTT) Group Call
- 6.14 Presence Management
- 6.15 Location
- 7. Use Handset to Verify the VoWiFi System Deployment
- 8. Handset Internal Web Administration Page
- 9. Administration
- 10. Troubleshooting
- 11. Related Documents
- 12. Document History
- Appendix A: Working with Templates
- Index
- Contents
TD 92675EN
20 June 2012 / Ver. E
Configuration Manual
Ascom i62 VoWiFi Handset
36
6. Handset Configuration
6.5.1 Automatic key lock
NOTE: If configured, it is possible to dial a pre-defined emergency number when the keypad
is locked, see 6.9.
6 Emergency Number on page 52.
1 Select Device > Settings.
2In the Automatic key lock drop-down list, sele
ct one of the following:
• Enable - activates automatic key lock.
• Disable - deactivates automatic key lock
6.5.2 Phone lock
Activate the phone lock to prevent unauthoriz
ed usage of the
handset. A password is
required to unlock the handset in order to access its functions.
NOTE: If configured, it is possible to dial a pre-defined emergency
number when the handset
is locked, see 6.9.6 Emergency Number on page 52. It is not recommended to use
Phone Lock when using the Shared Phone feature.
1 Select Device > Settings.
2In the Phone lock drop-d
own list, select one of the following:
• On - the handset will be locked after a few seconds when it is not used.
• On in charger - the handset will be locked when placed in charger.
• Off - the phone lock is disabled.
6.5.3 Audio adjustment
Select the volumes for the different
audio
signals in the handset.
1 Select Audio > Volume.
2 Select the applicable volumes item in the
drop-down lists:
• Handsfree volume
• Headset volume
• Speaker volume
Display
6.11.1
User Display Tex
t on page 54 x x
6.11.3 Font style on page 55 x x
6.11.4 Backlight Timeout on page 55 x
6.11.5 Brightness on page 55 x x
6.11.6 Screen Saver on page 55 x x
Messaging
6.7 Messaging Settings on page 44 x
b
x
Alarm
6.8 Alarm Settings on page 47 x
a. Refer to the User Manual for more information on how the user can change the settings via the hand-
set´s keypad.
b. Some parameters cannot be changed via the keypad.