User manual

TD 92675EN
20 June 2012 / Ver. E
Configuration Manual
Ascom i62 VoWiFi Handset
41
6. Handset Configuration
3 If the uploaded language shall be used in the handset, see 6.5.12 Select Default
Language for more information.
6.5.12 Select Default La
nguage
Defines he default operating language for the handset. This sett
ing can later be changed by
the user.
1 Select Device > Settings.
2In the Language drop-do
wn list, select the language to be used.
3 If the downloaded language is selected, it might be needed to select matching
ch
aracters as text input language, and the sort order in the phonebook
In the Input Language drop-do
wn list, select the text input language to be used.
NOTE: This parameter is only applicable for the do
wnloaded language and cannot be
changed by the user.
6.5.13 Short cuts
One click access to predefined functions can
be configured for the Soft keys, Hot keys,
Navigation keys, and the Multifunction button
1
. It is for example possible to define the soft
key to make a call.
Configure a Hot Key
A hot key is activated by pressing a preprogrammed button
“0”, “2“ - “9” for more than 1
second in idle mode. The function is used, for example, to change profile, send message or
make a phone call to a specific number.
1 Select Short cuts > Hot keys X (where X is 0, 2 - 9).
2Continue with Additional Short Cut Settings on page 42.
Configure Soft Key
1 Select Short cuts > Soft Key X (where X is Left, Middle, or Right)
2 In the Name field, enter the name of the soft key to be display
ed in the handset.
3Continue with Additional Short Cut Settings on page 42.
Configure Navigation Key
1 Select Short cuts > Navigation Key X (where X is Up, Down, L
eft, or Right)
2Continue with Additional Short Cut Settings on page 42.
Configure Multifunction Button
1 Select Short cuts > Multifunction button X (where
X is Long press or Multi press)
2Continue with Additional Short Cut Settings on page 42.
1. The Multifunction button is applicable for Talker and Messenger only.