User manual

TD 92675EN
20 June 2012 / Ver. E
Configuration Manual
Ascom i62 VoWiFi Handset
45
6. Handset Configuration
• Repeat message indication
This parameter enables/disables message indications. It sets whether a message
ind
ication shall be repeated until confirmed by the user or not. The current repetition
rate is 7 seconds. If the message itself contains a repetition, it overrides this setting.
• Vibrator for message during call
Determines if the handset shall vibrate when receiving mess
ages during
an ongoing call.
• IM option mode
This parameter is used for older applications and sets that three soft keys sh
all be placed
automatically, i.e. on soft keys or in an option menu (list).
6.7.1 Examples of TTR/TTP settings
Example 1
This example describes the message handling with
the following message settings:
• TTP
= Prioritize forever
• TTR= Close manually
Tip: It is recommended to use these settings if m
essages with the highest priority always
shall be displayed until the user closes the current message.
Figure 4.
Prio 7
14:04
Prio 2
13:59
Prio 2
14:02
Prio 4
14:03
Prio 4
14:03
Prio 4
13:58
Prio 7
14:04
Prio 2
14:02
Prio 2
13:59
New messages
M
essage queue
Prio 4
14:03
Prio 4
13:58
Prio 7
14:04
Prio 2
14:02
M
essage queue
The user closes
the message
How queuing and prioritizing for messages with equal messages works
In figure 4, a message with priority
2 is received at 13:59 and is displayed in the handset.
Another message with equal priority is received at 14:02 and will be placed in the queue. If
no messages with higher priority are received, the user needs to close the current displayed
message to show the next message in the queue. In this case, the message received at
14:02. The closed message will be indicated as a read message in the Messaging Inbox.
Example 2
This example describes the message handling with
the following message settings:
• TTP
= 20 seconds
• TTR= Close manually