User manual
Table Of Contents
- 1. Introduction
- 2. Pre-Installation
- 3. Programming the VoWiFi Handset
- 4. Installation of VoWiFi Handsets
- 5. Maintenance
- 5.1 Handset
- 5.1.1 Configure Spare Handsets without a Number in Large Systems
- 5.1.2 Upgrade Handset Software
- 5.1.3 Upgrade Software OTA via TFTP
- 5.1.4 Upgrade Software via PDM
- 5.1.5 Upgrade Software Over the Air (OTA) via Centralized Device Management (IMS3)
- 5.1.6 Recapture the Earlier Software
- 5.1.7 Upgrade Handset Functionality using License
- 5.1.8 Perform a Factory reset
- 5.2 Replacement of Handsets
- 5.3 Change Number of a Handset
- 5.4 Update Parameters via IMS3
- 5.5 Perform a Security Upgrade via IMS3
- 5.6 Upgrade the Template
- 5.7 Create a Configuration Backup
- 5.1 Handset
- 6. Handset Configuration
- 6.1 Select Network
- 6.2 IP Address Settings
- 6.3 Network Settings
- 6.4 Security Settings
- 6.5 Handset Settings
- 6.5.1 Automatic key lock
- 6.5.2 Phone lock
- 6.5.3 Audio adjustment
- 6.5.4 Headset Configuration
- 6.5.5 In Charger Behavior
- 6.5.6 Configure Profiles
- 6.5.7 Hide Missed Call Window
- 6.5.8 Battery Warning
- 6.5.9 Shared Phone
- 6.5.10 Prevent Handset Switch off
- 6.5.11 Uploadable Language
- 6.5.12 Select Default Language
- 6.5.13 Short cuts
- 6.5.14 Soft Key Functions During Call
- 6.5.15 Import Contacts
- 6.5.16 Company Phonebook
- 6.5.17 Central Phonebook
- 6.6 Messaging and Alarm
- 6.7 Messaging Settings
- 6.8 Alarm Settings
- 6.9 Telephony
- 6.9.1 Endpoint ID and Endpoint number
- 6.9.2 VoIP Protocol
- 6.9.3 Codec
- 6.9.4 Offer Secure RTP
- 6.9.5 Internal Call Number Length
- 6.9.6 Emergency Number
- 6.9.7 Voice Mail Number
- 6.9.8 Message Centre Number
- 6.9.9 Max number of Call Completions
- 6.9.10 Dial Pause Time
- 6.9.11 Direct off Hook from Charger
- 6.9.12 Replace Call Rejected with User Busy
- 6.9.13 Busy on 1 / Disable call waiting
- 6.9.14 Calling Line Restriction
- 6.10 Regional Settings
- 6.11 Display
- 6.12 Menu Operation
- 6.13 Push-To-Talk (PTT) Group Call
- 6.14 Presence Management
- 6.15 Location
- 7. Use Handset to Verify the VoWiFi System Deployment
- 8. Handset Internal Web Administration Page
- 9. Administration
- 10. Troubleshooting
- 11. Related Documents
- 12. Document History
- Appendix A: Working with Templates
- Index
- Contents
TD 92675EN
20 June 2012 / Ver. E
Configuration Manual
Ascom i62 VoWiFi Handset
57
6. Handset Configuration
• The group number to the PTT group (defined in the IMS3).
• The phone number to the conference bridge.
Tip: For more information about the PTT funct
ion, see also Function Description, Ascom
VoWiFi System, TD 92314EN or User Manual, Ascom i62 VoWiFi Handset, TD 92599EN.
NOTE: If Music on Hold (MOH) is used in the system it can
affect an ongoing PTT group call. If
someone in the group conference answers another incoming call, MOH will be played
for the whole group.
1 Select Push-To-Talk > X (wh
ere
X represents 1-10).
2In the Session name field, enter a name to identify the PTT session.
3In the Group number field, enter the number to the PTT conference group.
4In the Display text fie
l
d, enter a text to be shown in the display during the PTT
session.
5In the PTT sess
ion signal drop-down list, select the indication of the PTT session.
6In the Conference number field, enter the
phone number to the conference bridge.
7In the Answer mode drop-down list, select the a
nswer mode for the PTT session.
8In the Speaker mode drop-down list, sel
ect the speaker mode for the PTT session.
9A Serv
ice must be configured to access the PTT session from the handset. If not
configured, continue with 6.12.2 Services.
6.14 Presence Management
NOTE: This is a system dependent feature.
To be able to configure presence manag
ement, the following must be known:
• The IP address to the Presence Management system.
• The user name and password used in the Presen
ce Management system for each
handset.
For more information about presence management, see Fu
nction Description, Ascom VoWiFi
System, TD 92314EN or User Manual, Ascom i62 VoWiFi Handset, TD 92599EN.
1 Select Presence > Common.
2In the Presence Manageme
nt system drop-down list, select presence management
system.
3 Select “Presence“ and the presence management syst
em selected in previous step.
4In the IP address field,
enter the IP address to the presence management system.
5In the Listening port field, enter the port number the presence management system
sh
all listen to.
6In the user name field, enter the Enter the user name.
7In the password field, enter the password.
If the Presence function is configured, it will be visible under Call > Presence in the handset.
It is
al
so possible to configure a short cut in order to access the Presence menu, see 6.5.13
Short cuts on page 41.
6.15 Location
Two types of location are supported, either a basic location solution that gives an
approximate location using Access Point (AP) location, or a personal security solution that