User manual
Table Of Contents
- 1. Introduction
- 2. Pre-Installation
- 3. Programming the VoWiFi Handset
- 4. Installation of VoWiFi Handsets
- 5. Maintenance
- 5.1 Handset
- 5.1.1 Configure Spare Handsets without a Number in Large Systems
- 5.1.2 Upgrade Handset Software
- 5.1.3 Upgrade Software OTA via TFTP
- 5.1.4 Upgrade Software via PDM
- 5.1.5 Upgrade Software Over the Air (OTA) via Centralized Device Management (IMS3)
- 5.1.6 Recapture the Earlier Software
- 5.1.7 Upgrade Handset Functionality using License
- 5.1.8 Perform a Factory reset
- 5.2 Replacement of Handsets
- 5.3 Change Number of a Handset
- 5.4 Update Parameters via IMS3
- 5.5 Perform a Security Upgrade via IMS3
- 5.6 Upgrade the Template
- 5.7 Create a Configuration Backup
- 5.1 Handset
- 6. Handset Configuration
- 6.1 Select Network
- 6.2 IP Address Settings
- 6.3 Network Settings
- 6.4 Security Settings
- 6.5 Handset Settings
- 6.5.1 Automatic key lock
- 6.5.2 Phone lock
- 6.5.3 Audio adjustment
- 6.5.4 Headset Configuration
- 6.5.5 In Charger Behavior
- 6.5.6 Configure Profiles
- 6.5.7 Hide Missed Call Window
- 6.5.8 Battery Warning
- 6.5.9 Shared Phone
- 6.5.10 Prevent Handset Switch off
- 6.5.11 Uploadable Language
- 6.5.12 Select Default Language
- 6.5.13 Short cuts
- 6.5.14 Soft Key Functions During Call
- 6.5.15 Import Contacts
- 6.5.16 Company Phonebook
- 6.5.17 Central Phonebook
- 6.6 Messaging and Alarm
- 6.7 Messaging Settings
- 6.8 Alarm Settings
- 6.9 Telephony
- 6.9.1 Endpoint ID and Endpoint number
- 6.9.2 VoIP Protocol
- 6.9.3 Codec
- 6.9.4 Offer Secure RTP
- 6.9.5 Internal Call Number Length
- 6.9.6 Emergency Number
- 6.9.7 Voice Mail Number
- 6.9.8 Message Centre Number
- 6.9.9 Max number of Call Completions
- 6.9.10 Dial Pause Time
- 6.9.11 Direct off Hook from Charger
- 6.9.12 Replace Call Rejected with User Busy
- 6.9.13 Busy on 1 / Disable call waiting
- 6.9.14 Calling Line Restriction
- 6.10 Regional Settings
- 6.11 Display
- 6.12 Menu Operation
- 6.13 Push-To-Talk (PTT) Group Call
- 6.14 Presence Management
- 6.15 Location
- 7. Use Handset to Verify the VoWiFi System Deployment
- 8. Handset Internal Web Administration Page
- 9. Administration
- 10. Troubleshooting
- 11. Related Documents
- 12. Document History
- Appendix A: Working with Templates
- Index
- Contents
TD 92675EN
20 June 2012 / Ver. E
Configuration Manual
Ascom i62 VoWiFi Handset
71
12. Document History
12. Document History
For details in the latest version, see change bars in the document.
For details in the latest version, see change bars in the document.
Version Date Description
A 10 January 2011 First version
B 20 June 2011 • Removed section 802.1X with LEAP.
• Added description of parameters for Man-
down and No-movement alarms.
• Replaced IMS2 with IMS3.
• Minor text and layout changes.
C 1 September 2011 • Replaced WinPDM with PDM.
• Replaced Elise2 with Elise3 in graphics.
• Edited section Related Documents.
• Minor text changes.
D 9 December 2011 • Added Manufacturer address.
• Update of Admin menu tree.
• Minor text updates
E 20 June 2012 • Replaced “VoWiFi Handset” with “handset”
except in 1. Introduction
• Removed CE + address in 1. Introduction
• Added section 6.1.3 Enable Switch between
Networks.
• Edited 6.9.4 Offer Secure RTP.
• Added G.722 in 6.9.3 Codec.
• Edited SIP Protocol section in n 6.9.2 VoIP
Protocol.
• Added 6.11.2 Rotate Display Text.
• Removed “Admin menu is accessed from the
Calls menu” in 4.3 Installation using the
Handset’s Admin Menu
• Added 6.9.14 Calling Line Restriction.
• Changed “Off-hook Button” to “End key”.
• Updated text and images of Internal Web
Administration Page 8.1.1 General View, 8.1.2
Troubleshoot View, 8.2 Change Administration
Password and 10.3 Troubleshooting from the
handset Internal Web Administration Page.
• Updated 9.1 Admin Menu Tree
• Minor text and layout changes.