User's Manual
Table Of Contents
- 1Introduction
- 2Description of the Ascom i63 VoWiFi Handset
- 3Basic Operation
- 4Calling
- 4.1 Open the Call List
- 4.2 Incoming Call
- 4.3 Outgoing Call
- 4.3.1 Pre-Dial
- 4.3.2 Post-Dial with Headset Button
- 4.3.3 Dial Using a Pre-programmed Number
- 4.3.4 Dial a Number from the Call List
- 4.3.5 Dial Last Called Number with Headset Button
- 4.3.6 Dial the Sender of a Message
- 4.3.7 Dial a Number from Contacts
- 4.3.8 Dial a Name from the Central Phonebook
- 4.3.9 Dial a Number from the Company Phonebook
- 4.4 During a Call
- 4.4.1 Adjust the Volume during a Call
- 4.4.2 Open Contacts during a Call
- 4.4.3 Open Messaging Menu during a Call
- 4.4.4 Turn the Microphone On or Off during a Call
- 4.4.5 Lock and Unlock the Keypad during a Call
- 4.4.6 Audio Transfer
- 4.4.7 Start a New Call during Conversation
- 4.4.8 Switch between Calls
- 4.4.9 End a Call
- 4.4.10 Transfer a Call
- 4.4.11 Transfer to New Call
- 4.4.12 Conference Call
- 4.4.13 Call Back
- 4.4.14 Send Call Waiting
- 4.4.15 Answering Call Waiting
- 4.4.16 DTMF
- 4.4.17 Send Data
- 4.5 Loudspeaking Function
- 4.6 Call Diversion
- 4.7 Push-to-Talk Group Call
- 4.8 Emergency Calls
- 5Messaging
- 5.1 Message List
- 5.2 Receive a Message
- 5.2.1 Read a Stored Message
- 5.2.2 Reply to a Message
- 5.2.3 Delete Messages
- 5.2.4 Forward a Message
- 5.2.5 Call the Sender of the Message
- 5.2.6 Call a Number Included in a Message
- 5.2.7 Save Number
- 5.2.8 Message Templates
- 5.2.9 Write and Send a Message
- 5.2.10 Open a Sent Message
- 5.2.11 Review Inbox Content while Reading a Message
- 5.3 Receive a Message with Request for Answer
- 5.4 Message Queuing and Message Priority
- 5.5 Message Priority and Call Priority
- 5.6 Interactive Messaging
- 5.7 Message Indication Repetition
- 5.8 Colored Messaging
- 5.9 Decline a Call with a Predefined Message
- 5.10 Answering a Text Message with a Predefined Message
- 5.11 Calling while Reading a Text Message
- 5.12 Mobile Data
- 5.13 Voicemail
- 6Alarm Operation
- 7Location
- 8Menu Operation
- 9System Profiles
- 10Advanced Functions
- 11Advanced Messaging
- 12System Handling
- 13Operation Notice
- 14Maintenance
- 15Troubleshooting
- 16Energy Efficiency
- 17Related Documents
- 18Revision History
- Appendix ASafety and Regulatory Instructions
- Appendix BMenu Tree
PRELIMINARY
Basic Operation
USER MANUAL
Ascom i63 VoWiFi Handset
3 Basic Operation
For information on how to answer and end a call, see 4.2 Incoming Call, page 17.
3.1 GDPR Considerations
The handset provides data protection by design, and with the default settings the GDPR requirements are
followed.
To comply with GDPR, make sure that Auto phone lock is enabled. See 3.7 Lock and Unlock the Handset,
page 16.
3.2 Switch the Handset On and Off
Switch On the Handset
Press and hold
. When pressing , the handset vibrates and the display lights up.
Switch Off the Handset
Prerequisite: The handset is in idle mode.
While in a menu, press to return to idle mode. If the handset is a shared phone, it must first be
logged out to be able to switch off the handset. See 3.4 Log a Shared Phone On and Off, page 14.
A user can be prevented from switching off the handset by enabling the parameter Prevent switch
off in WinPDM/Device Manager.
1 Press and hold
.
2 A dialog window Switch off? is displayed. Confirm by
pressing Yes.
If a handset restriction is enabled, it may not be possible to switch off the handset. Refer to the
Configuration Manual, Ascom i63 VoWiFi Handset, TD 93300EN.
3.3 Easy Deployment
A handset is automatically installed in the VoWiFi system without the need for the WinPDM, if the VoWiFi
system is configured for Easy Deployment, refer to the Configuration Manual, Ascom i63 VoWiFi Handset,
TD 93300EN.
1 If needed, switch off the handset by pressing and
holding
.
2 Switch on the handset by pressing and holding
.
13 TD 93289EN / / Ver.