User's Manual
Table Of Contents
- 1Introduction
- 2Description of the Ascom i63 VoWiFi Handset
- 3Basic Operation
- 4Calling
- 4.1 Open the Call List
- 4.2 Incoming Call
- 4.3 Outgoing Call
- 4.3.1 Pre-Dial
- 4.3.2 Post-Dial with Headset Button
- 4.3.3 Dial Using a Pre-programmed Number
- 4.3.4 Dial a Number from the Call List
- 4.3.5 Dial Last Called Number with Headset Button
- 4.3.6 Dial the Sender of a Message
- 4.3.7 Dial a Number from Contacts
- 4.3.8 Dial a Name from the Central Phonebook
- 4.3.9 Dial a Number from the Company Phonebook
- 4.4 During a Call
- 4.4.1 Adjust the Volume during a Call
- 4.4.2 Open Contacts during a Call
- 4.4.3 Open Messaging Menu during a Call
- 4.4.4 Turn the Microphone On or Off during a Call
- 4.4.5 Lock and Unlock the Keypad during a Call
- 4.4.6 Audio Transfer
- 4.4.7 Start a New Call during Conversation
- 4.4.8 Switch between Calls
- 4.4.9 End a Call
- 4.4.10 Transfer a Call
- 4.4.11 Transfer to New Call
- 4.4.12 Conference Call
- 4.4.13 Call Back
- 4.4.14 Send Call Waiting
- 4.4.15 Answering Call Waiting
- 4.4.16 DTMF
- 4.4.17 Send Data
- 4.5 Loudspeaking Function
- 4.6 Call Diversion
- 4.7 Push-to-Talk Group Call
- 4.8 Emergency Calls
- 5Messaging
- 5.1 Message List
- 5.2 Receive a Message
- 5.2.1 Read a Stored Message
- 5.2.2 Reply to a Message
- 5.2.3 Delete Messages
- 5.2.4 Forward a Message
- 5.2.5 Call the Sender of the Message
- 5.2.6 Call a Number Included in a Message
- 5.2.7 Save Number
- 5.2.8 Message Templates
- 5.2.9 Write and Send a Message
- 5.2.10 Open a Sent Message
- 5.2.11 Review Inbox Content while Reading a Message
- 5.3 Receive a Message with Request for Answer
- 5.4 Message Queuing and Message Priority
- 5.5 Message Priority and Call Priority
- 5.6 Interactive Messaging
- 5.7 Message Indication Repetition
- 5.8 Colored Messaging
- 5.9 Decline a Call with a Predefined Message
- 5.10 Answering a Text Message with a Predefined Message
- 5.11 Calling while Reading a Text Message
- 5.12 Mobile Data
- 5.13 Voicemail
- 6Alarm Operation
- 7Location
- 8Menu Operation
- 9System Profiles
- 10Advanced Functions
- 11Advanced Messaging
- 12System Handling
- 13Operation Notice
- 14Maintenance
- 15Troubleshooting
- 16Energy Efficiency
- 17Related Documents
- 18Revision History
- Appendix ASafety and Regulatory Instructions
- Appendix BMenu Tree
PRELIMINARY
Basic Operation
USER MANUAL
Ascom i63 VoWiFi Handset
Log On a Handset
The handset must be switched on and no other user can be logged on. See 3.2 Switch the Handset On and
Off, page 13.
1 A dialog window Login? is displayed. Press the soft
key Yes.
2 Enter User ID and password.
3 Press Login.
The user will be automatically logged out from a previously used handset.
Log Off a Handset
1 Press and hold
.
2 A dialog window Logout? is displayed. Press the soft
key Yes.
If a phone is shared and one of the users logs off the shared phone, the lock that prevents the
handset from unauthorized use is deactivated.
For related information, see 3.7 Lock and Unlock the Handset, page 16
3.5 Turn the Audible Signal On or Off
If handset restrictions are enabled, you might not be able to turn off the audible signal.
A long press on the
or the mute button in idle mode, changes between ring signal on/off.
The
icon indicates a silenced headset.
3.6 Lock and Unlock the Keypad
To avoid that any keys are accidentally pressed during a call, the keypad can be locked. This can be useful
for example when a headset is used and the handset is attached to a pocket or belt.
An incoming call can be answered and the Multifunction or Alarm button can be pressed while the
keypad is locked. If configured in the WinPDM/Device Manager, an emergency call can also be
made while the keypad is locked. Refer to the Configuration Manual, Ascom i63 VoWiFi Handset,
TD 93300EN.
Also, the volume buttons and the mute button can be pressed during the call.
For information about what functions that are supported by existing handset models, see 1.4
Functions and Accessories, page 2.
15 TD 93289EN / / Ver.