User's Manual
Table Of Contents
- 1Introduction
- 2Description of the Ascom i63 VoWiFi Handset
- 3Basic Operation
- 4Calling
- 4.1 Open the Call List
- 4.2 Incoming Call
- 4.3 Outgoing Call
- 4.3.1 Pre-Dial
- 4.3.2 Post-Dial with Headset Button
- 4.3.3 Dial Using a Pre-programmed Number
- 4.3.4 Dial a Number from the Call List
- 4.3.5 Dial Last Called Number with Headset Button
- 4.3.6 Dial the Sender of a Message
- 4.3.7 Dial a Number from Contacts
- 4.3.8 Dial a Name from the Central Phonebook
- 4.3.9 Dial a Number from the Company Phonebook
- 4.4 During a Call
- 4.4.1 Adjust the Volume during a Call
- 4.4.2 Open Contacts during a Call
- 4.4.3 Open Messaging Menu during a Call
- 4.4.4 Turn the Microphone On or Off during a Call
- 4.4.5 Lock and Unlock the Keypad during a Call
- 4.4.6 Audio Transfer
- 4.4.7 Start a New Call during Conversation
- 4.4.8 Switch between Calls
- 4.4.9 End a Call
- 4.4.10 Transfer a Call
- 4.4.11 Transfer to New Call
- 4.4.12 Conference Call
- 4.4.13 Call Back
- 4.4.14 Send Call Waiting
- 4.4.15 Answering Call Waiting
- 4.4.16 DTMF
- 4.4.17 Send Data
- 4.5 Loudspeaking Function
- 4.6 Call Diversion
- 4.7 Push-to-Talk Group Call
- 4.8 Emergency Calls
- 5Messaging
- 5.1 Message List
- 5.2 Receive a Message
- 5.2.1 Read a Stored Message
- 5.2.2 Reply to a Message
- 5.2.3 Delete Messages
- 5.2.4 Forward a Message
- 5.2.5 Call the Sender of the Message
- 5.2.6 Call a Number Included in a Message
- 5.2.7 Save Number
- 5.2.8 Message Templates
- 5.2.9 Write and Send a Message
- 5.2.10 Open a Sent Message
- 5.2.11 Review Inbox Content while Reading a Message
- 5.3 Receive a Message with Request for Answer
- 5.4 Message Queuing and Message Priority
- 5.5 Message Priority and Call Priority
- 5.6 Interactive Messaging
- 5.7 Message Indication Repetition
- 5.8 Colored Messaging
- 5.9 Decline a Call with a Predefined Message
- 5.10 Answering a Text Message with a Predefined Message
- 5.11 Calling while Reading a Text Message
- 5.12 Mobile Data
- 5.13 Voicemail
- 6Alarm Operation
- 7Location
- 8Menu Operation
- 9System Profiles
- 10Advanced Functions
- 11Advanced Messaging
- 12System Handling
- 13Operation Notice
- 14Maintenance
- 15Troubleshooting
- 16Energy Efficiency
- 17Related Documents
- 18Revision History
- Appendix ASafety and Regulatory Instructions
- Appendix BMenu Tree
PRELIMINARY
USER MANUAL
Ascom i63 VoWiFi Handset
Basic Operation
Lock Keypad
1 Press
.
2 Press Lock.
Unlock Keypad
1 Press
.
2 A dialog window Unlock? is displayed. Confirm by
pressing Yes.
3.7 Lock and Unlock the Handset
The handset can be locked to prevent unauthorized use. If this function is activated, a PIN code has to be
entered for example to switch on the handset, to answer an incoming call, and so on. The default phone
lock code (0000) can be changed to any 4–8 digit personalized code.
If a phone is shared and one of the users logs off the shared phone, the lock that prevents the
handset from unauthorized use is deactivated.
For related information, see 3.7 Lock and Unlock the Handset, page 16
The handset can be configured with predefined emergency numbers that can be called while the
handset is locked. Refer to the Configuration Manual, Ascom i63 VoWiFi Handset, TD 93300EN.
Depending on the model of the handset, the Alarm button can also be used. For information about
what functions that are supported by existing handset models, see 1.4 Functions and Accessories,
page 2.
1 Enter the Settings menu.
2 Select Locks.
3 Select Phone lock.
4 Select Auto phone lock.
5 Select On, On in charger, or Off.
3.8 Mute Handset on Incoming Call or Message
The handset can be muted temporarily on an incoming call or message. The call is not hung up when the
handset is muted. If the call is unanswered, it reverts to voicemail if the handset has been configured for
voicemail.
To mute an incoming call or message, press
or the mute button while the handset sounds.
TD 93289EN / / Ver. 16