User's Manual
Table Of Contents
- 1Introduction
- 2Description of the Ascom i63 VoWiFi Handset
- 3Basic Operation
- 4Calling
- 4.1 Open the Call List
- 4.2 Incoming Call
- 4.3 Outgoing Call
- 4.3.1 Pre-Dial
- 4.3.2 Post-Dial with Headset Button
- 4.3.3 Dial Using a Pre-programmed Number
- 4.3.4 Dial a Number from the Call List
- 4.3.5 Dial Last Called Number with Headset Button
- 4.3.6 Dial the Sender of a Message
- 4.3.7 Dial a Number from Contacts
- 4.3.8 Dial a Name from the Central Phonebook
- 4.3.9 Dial a Number from the Company Phonebook
- 4.4 During a Call
- 4.4.1 Adjust the Volume during a Call
- 4.4.2 Open Contacts during a Call
- 4.4.3 Open Messaging Menu during a Call
- 4.4.4 Turn the Microphone On or Off during a Call
- 4.4.5 Lock and Unlock the Keypad during a Call
- 4.4.6 Audio Transfer
- 4.4.7 Start a New Call during Conversation
- 4.4.8 Switch between Calls
- 4.4.9 End a Call
- 4.4.10 Transfer a Call
- 4.4.11 Transfer to New Call
- 4.4.12 Conference Call
- 4.4.13 Call Back
- 4.4.14 Send Call Waiting
- 4.4.15 Answering Call Waiting
- 4.4.16 DTMF
- 4.4.17 Send Data
- 4.5 Loudspeaking Function
- 4.6 Call Diversion
- 4.7 Push-to-Talk Group Call
- 4.8 Emergency Calls
- 5Messaging
- 5.1 Message List
- 5.2 Receive a Message
- 5.2.1 Read a Stored Message
- 5.2.2 Reply to a Message
- 5.2.3 Delete Messages
- 5.2.4 Forward a Message
- 5.2.5 Call the Sender of the Message
- 5.2.6 Call a Number Included in a Message
- 5.2.7 Save Number
- 5.2.8 Message Templates
- 5.2.9 Write and Send a Message
- 5.2.10 Open a Sent Message
- 5.2.11 Review Inbox Content while Reading a Message
- 5.3 Receive a Message with Request for Answer
- 5.4 Message Queuing and Message Priority
- 5.5 Message Priority and Call Priority
- 5.6 Interactive Messaging
- 5.7 Message Indication Repetition
- 5.8 Colored Messaging
- 5.9 Decline a Call with a Predefined Message
- 5.10 Answering a Text Message with a Predefined Message
- 5.11 Calling while Reading a Text Message
- 5.12 Mobile Data
- 5.13 Voicemail
- 6Alarm Operation
- 7Location
- 8Menu Operation
- 9System Profiles
- 10Advanced Functions
- 11Advanced Messaging
- 12System Handling
- 13Operation Notice
- 14Maintenance
- 15Troubleshooting
- 16Energy Efficiency
- 17Related Documents
- 18Revision History
- Appendix ASafety and Regulatory Instructions
- Appendix BMenu Tree
PRELIMINARY
Calling
USER MANUAL
Ascom i63 VoWiFi Handset
4.4.10 Transfer a Call
This option is only visible if configured in the handset. For more information, refer to the Configura-
tion Manual, Ascom i63 VoWiFi Handset, TD 93300EN.
When there are two ongoing calls, the first call can be transferred to the second call.
A new call must have been started during conversation, see 4.4.7 Start a New Call during Conversation,
page 22.
1 During a call, press the soft key More.
2 Select Transfer.
3 Press Select. This connects the first call with the
second call. Your calls are automatically disconnected.
4.4.11 Transfer to New Call
An ongoing call can be transferred to a new number. When the new call is established, the caller that
initiated the transfer is disconnected.
This option is only visible when the parameters New call and Transfer are defined in the handset.
For more information, refer to the Configuration Manual, Ascom i63 VoWiFi Handset, TD 93300EN.
1 During a call, press the soft key More.
2 Select Transf. to new.
3 Press Select.
4 Enter the number of the person where the ongoing
call is to be transferred or press
to access the
phonebook.
5 Press
to transfer the call. Your call is automatically
disconnected.
4.4.12 Conference Call
This option is only visible if configured in the handset. For more information, refer to the Configura-
tion Manual, Ascom i63 VoWiFi Handset, TD 93300EN.
With a conference call, a conversation can be made between several participants simultaneously.
A new call must have been started during conversation, see 4.4.7 Start a New Call during Conversation,
page 22.
1 During a call, press the soft key More.
2 Select Conference.
3 Press Select.
23 TD 93289EN / / Ver.