User's Manual
Table Of Contents
- 1Introduction
- 2Description of the Ascom i63 VoWiFi Handset
- 3Basic Operation
- 4Calling
- 4.1 Open the Call List
- 4.2 Incoming Call
- 4.3 Outgoing Call
- 4.3.1 Pre-Dial
- 4.3.2 Post-Dial with Headset Button
- 4.3.3 Dial Using a Pre-programmed Number
- 4.3.4 Dial a Number from the Call List
- 4.3.5 Dial Last Called Number with Headset Button
- 4.3.6 Dial the Sender of a Message
- 4.3.7 Dial a Number from Contacts
- 4.3.8 Dial a Name from the Central Phonebook
- 4.3.9 Dial a Number from the Company Phonebook
- 4.4 During a Call
- 4.4.1 Adjust the Volume during a Call
- 4.4.2 Open Contacts during a Call
- 4.4.3 Open Messaging Menu during a Call
- 4.4.4 Turn the Microphone On or Off during a Call
- 4.4.5 Lock and Unlock the Keypad during a Call
- 4.4.6 Audio Transfer
- 4.4.7 Start a New Call during Conversation
- 4.4.8 Switch between Calls
- 4.4.9 End a Call
- 4.4.10 Transfer a Call
- 4.4.11 Transfer to New Call
- 4.4.12 Conference Call
- 4.4.13 Call Back
- 4.4.14 Send Call Waiting
- 4.4.15 Answering Call Waiting
- 4.4.16 DTMF
- 4.4.17 Send Data
- 4.5 Loudspeaking Function
- 4.6 Call Diversion
- 4.7 Push-to-Talk Group Call
- 4.8 Emergency Calls
- 5Messaging
- 5.1 Message List
- 5.2 Receive a Message
- 5.2.1 Read a Stored Message
- 5.2.2 Reply to a Message
- 5.2.3 Delete Messages
- 5.2.4 Forward a Message
- 5.2.5 Call the Sender of the Message
- 5.2.6 Call a Number Included in a Message
- 5.2.7 Save Number
- 5.2.8 Message Templates
- 5.2.9 Write and Send a Message
- 5.2.10 Open a Sent Message
- 5.2.11 Review Inbox Content while Reading a Message
- 5.3 Receive a Message with Request for Answer
- 5.4 Message Queuing and Message Priority
- 5.5 Message Priority and Call Priority
- 5.6 Interactive Messaging
- 5.7 Message Indication Repetition
- 5.8 Colored Messaging
- 5.9 Decline a Call with a Predefined Message
- 5.10 Answering a Text Message with a Predefined Message
- 5.11 Calling while Reading a Text Message
- 5.12 Mobile Data
- 5.13 Voicemail
- 6Alarm Operation
- 7Location
- 8Menu Operation
- 9System Profiles
- 10Advanced Functions
- 11Advanced Messaging
- 12System Handling
- 13Operation Notice
- 14Maintenance
- 15Troubleshooting
- 16Energy Efficiency
- 17Related Documents
- 18Revision History
- Appendix ASafety and Regulatory Instructions
- Appendix BMenu Tree
PRELIMINARY
USER MANUAL
Ascom i63 VoWiFi Handset
Calling
The person initiating the conference call is the conference leader, and the other are participant members of
the conference call.
4.4.13 Call Back
When a call is made to a busy handset, an automatically call back can be made when the busy handset is
free.
This option is only visible if configured in the handset. For more information, refer to the Configura-
tion Manual, Ascom i63 VoWiFi Handset, TD 93300EN.
When a busy tone sounds, do as follows:
1 Press the soft key More.
2 Select Call back.
3 Press Select.
4 Press
and wait until the handset alerts.
5 When the handset alerts, press
. The call starts
automatically.
4.4.14 Send Call Waiting
This function is used when a calling party receives a busy signal from a party engaged in a call and wishes
to notify the party that another call is waiting.
This option is only visible if configured in the handset. For more information, refer to the Configura-
tion Manual, Ascom i63 VoWiFi Handset, TD 93300EN.
When a busy tone sounds, do as follows:
1 Press the soft key More.
2 Select Call waiting.
3 Press Select. The engaged party receives a Call
waiting signal.
When the line is free it automatically calls the number again. This is system dependent.
4.4.15 Answering Call Waiting
Depending on system setup and configuration, this feature might be handled in one of two different ways.
Method 1
During an ongoing conversation and a short tone for another incoming call appears, do as follows:
1 Press the soft key More.
2 Select Answer call waiting.
TD 93289EN / / Ver.
24