User's Manual

PRELIMINARY
Calling
USER MANUAL
Ascom i63 VoWiFi Handset
The Multifunction button may also be configured to serve as the PTT button. This makes it easier
for users who may have to wear gloves because of dress or other requirements. Because the
multifunction button is larger than the PTT button and found on top of the handset, it is easier to
locate and use compared to the smaller PTT button at the side of the handset.
In order to participate in the conference, the group members must accept an invitation received as a text
message, see 4.7.1 Accept a PTT Invitation, page 27.
If a member declines an invitation, the member can re-join the group/conference later on, see 8.1.7 Re-join a
PTT Group, page 53.
A user can also invite a group of members to participate in a conference call by calling a PTT group, see
4.7.3 Call a PTT Group, page 30.
Every PTT group must be defined in the Device Manager to be able to use this function. Refer to the
Configuration Manual, Ascom i63 VoWiFi Handset, TD 93300EN.
Set the automatic key lock to On, if it is desired to have key lock during an ongoing call, see
Activate the Automatic Key Lock, page 68.
4.7.1 Accept a PTT Invitation
A PTT invitation is viewed the same way as an ordinary message. The message can contain up to 255
characters.
Accept Invitation Received as Incoming Call (PTT Basic)
A PTT invitation received as an incoming call is indicated by the
icon. In the dialogue window, a message
containing maximum 24 characters can also be shown. See Figure 5. Incoming Invitation Received as a Call,
page 27.
Figure 5. Incoming Invitation Received as a Call
1 Press Accept, or .
27
TD 93289EN / / Ver.