User's Manual
Table Of Contents
- 1Introduction
- 2Description of the Ascom i63 VoWiFi Handset
- 3Basic Operation
- 4Calling
- 4.1 Open the Call List
- 4.2 Incoming Call
- 4.3 Outgoing Call
- 4.3.1 Pre-Dial
- 4.3.2 Post-Dial with Headset Button
- 4.3.3 Dial Using a Pre-programmed Number
- 4.3.4 Dial a Number from the Call List
- 4.3.5 Dial Last Called Number with Headset Button
- 4.3.6 Dial the Sender of a Message
- 4.3.7 Dial a Number from Contacts
- 4.3.8 Dial a Name from the Central Phonebook
- 4.3.9 Dial a Number from the Company Phonebook
- 4.4 During a Call
- 4.4.1 Adjust the Volume during a Call
- 4.4.2 Open Contacts during a Call
- 4.4.3 Open Messaging Menu during a Call
- 4.4.4 Turn the Microphone On or Off during a Call
- 4.4.5 Lock and Unlock the Keypad during a Call
- 4.4.6 Audio Transfer
- 4.4.7 Start a New Call during Conversation
- 4.4.8 Switch between Calls
- 4.4.9 End a Call
- 4.4.10 Transfer a Call
- 4.4.11 Transfer to New Call
- 4.4.12 Conference Call
- 4.4.13 Call Back
- 4.4.14 Send Call Waiting
- 4.4.15 Answering Call Waiting
- 4.4.16 DTMF
- 4.4.17 Send Data
- 4.5 Loudspeaking Function
- 4.6 Call Diversion
- 4.7 Push-to-Talk Group Call
- 4.8 Emergency Calls
- 5Messaging
- 5.1 Message List
- 5.2 Receive a Message
- 5.2.1 Read a Stored Message
- 5.2.2 Reply to a Message
- 5.2.3 Delete Messages
- 5.2.4 Forward a Message
- 5.2.5 Call the Sender of the Message
- 5.2.6 Call a Number Included in a Message
- 5.2.7 Save Number
- 5.2.8 Message Templates
- 5.2.9 Write and Send a Message
- 5.2.10 Open a Sent Message
- 5.2.11 Review Inbox Content while Reading a Message
- 5.3 Receive a Message with Request for Answer
- 5.4 Message Queuing and Message Priority
- 5.5 Message Priority and Call Priority
- 5.6 Interactive Messaging
- 5.7 Message Indication Repetition
- 5.8 Colored Messaging
- 5.9 Decline a Call with a Predefined Message
- 5.10 Answering a Text Message with a Predefined Message
- 5.11 Calling while Reading a Text Message
- 5.12 Mobile Data
- 5.13 Voicemail
- 6Alarm Operation
- 7Location
- 8Menu Operation
- 9System Profiles
- 10Advanced Functions
- 11Advanced Messaging
- 12System Handling
- 13Operation Notice
- 14Maintenance
- 15Troubleshooting
- 16Energy Efficiency
- 17Related Documents
- 18Revision History
- Appendix ASafety and Regulatory Instructions
- Appendix BMenu Tree
PRELIMINARY
USER MANUAL
Ascom i63 VoWiFi Handset
Messaging
5 Enter the call number.
6 Press Send to send the message.
5.2.10 Open a Sent Message
1 Enter Messaging menu, see Messaging, page 101.
2 Select Sent.
3 Select message.
4 Press View to read the message.
5.2.11 Review Inbox Content while Reading a Message
To review the content of the inbox while reading a received message, perform the following steps:
1 Press the More soft key.
2 From the pop-up menu, select Inbox. The message
summaries contained in the inbox are displayed.
3 To return to the message previously being read, press
the Back soft key.
5.3 Receive a Message with Request for Answer
In the status bar, a message with request for answer is indicated the same way as an ordinary message, see
5.2 Receive a Message, page 32.
In the message list, the message with request for answer is indicated by the
icon.
5.3.1 Accept or Reject the Message
Press the soft key Accept or Reject.
When an acknowledged message has been replied to, the icon
is shown in the message list. The text
Accepted or Rejected as well as time and date is also added in the acknowledged message.
The option Delete is not available for a message with request for answer. An unacknowledged
message can only be deleted from the message list.
5.4 Message Queuing and Message Priority
To notify about new incoming messages, all incoming messages are placed in a message queue. The
sorting order for the message queue depends on the system settings. By default the messages are sorted
according to message priority, and thereafter according to arrival time.
The messages in the message queue are automatically displayed for 20 seconds until all messages have
been displayed. You can extend the time to display a message by pressing any button. You can also close a
message to immediately refer to the next message in the message queue.
TD 93289EN / / Ver. 36