User's Manual
Table Of Contents
- 1Introduction
- 2Description of the Ascom i63 VoWiFi Handset
- 3Basic Operation
- 4Calling
- 4.1 Open the Call List
- 4.2 Incoming Call
- 4.3 Outgoing Call
- 4.3.1 Pre-Dial
- 4.3.2 Post-Dial with Headset Button
- 4.3.3 Dial Using a Pre-programmed Number
- 4.3.4 Dial a Number from the Call List
- 4.3.5 Dial Last Called Number with Headset Button
- 4.3.6 Dial the Sender of a Message
- 4.3.7 Dial a Number from Contacts
- 4.3.8 Dial a Name from the Central Phonebook
- 4.3.9 Dial a Number from the Company Phonebook
- 4.4 During a Call
- 4.4.1 Adjust the Volume during a Call
- 4.4.2 Open Contacts during a Call
- 4.4.3 Open Messaging Menu during a Call
- 4.4.4 Turn the Microphone On or Off during a Call
- 4.4.5 Lock and Unlock the Keypad during a Call
- 4.4.6 Audio Transfer
- 4.4.7 Start a New Call during Conversation
- 4.4.8 Switch between Calls
- 4.4.9 End a Call
- 4.4.10 Transfer a Call
- 4.4.11 Transfer to New Call
- 4.4.12 Conference Call
- 4.4.13 Call Back
- 4.4.14 Send Call Waiting
- 4.4.15 Answering Call Waiting
- 4.4.16 DTMF
- 4.4.17 Send Data
- 4.5 Loudspeaking Function
- 4.6 Call Diversion
- 4.7 Push-to-Talk Group Call
- 4.8 Emergency Calls
- 5Messaging
- 5.1 Message List
- 5.2 Receive a Message
- 5.2.1 Read a Stored Message
- 5.2.2 Reply to a Message
- 5.2.3 Delete Messages
- 5.2.4 Forward a Message
- 5.2.5 Call the Sender of the Message
- 5.2.6 Call a Number Included in a Message
- 5.2.7 Save Number
- 5.2.8 Message Templates
- 5.2.9 Write and Send a Message
- 5.2.10 Open a Sent Message
- 5.2.11 Review Inbox Content while Reading a Message
- 5.3 Receive a Message with Request for Answer
- 5.4 Message Queuing and Message Priority
- 5.5 Message Priority and Call Priority
- 5.6 Interactive Messaging
- 5.7 Message Indication Repetition
- 5.8 Colored Messaging
- 5.9 Decline a Call with a Predefined Message
- 5.10 Answering a Text Message with a Predefined Message
- 5.11 Calling while Reading a Text Message
- 5.12 Mobile Data
- 5.13 Voicemail
- 6Alarm Operation
- 7Location
- 8Menu Operation
- 9System Profiles
- 10Advanced Functions
- 11Advanced Messaging
- 12System Handling
- 13Operation Notice
- 14Maintenance
- 15Troubleshooting
- 16Energy Efficiency
- 17Related Documents
- 18Revision History
- Appendix ASafety and Regulatory Instructions
- Appendix BMenu Tree
PRELIMINARY
Messaging
USER MANUAL
Ascom i63 VoWiFi Handset
In Figure 8. Example of a Colored Message, page 39, there are two colored messages, a new message and
a read message, in the message inbox (left in the figure). The messages are indicated by a gradient color
bar behind the envelopes. In addition, a gradient color bar is shown below the envelop when reading a
colored message (right in the figure).
Figure 8. Example of a Colored Message
To enable colored messaging, refer to the corresponding manual for the application used. In addition,
colored labels can be mapped to message beep codes. Refer to the Installation and Operation Manual,
Portable Device Manager for Windows (WinPDM), TD 92325EN.
5.9 Decline a Call with a Predefined Message
A call may be declined with a predefined message by the called party provided that both parties are
connected via a WLAN system.
To decline a call with a predefined message when the handset rings, perform the following steps:
1 In response to the Reply with a message
template? prompt, press the Yes soft key to send a
message to the caller. A list of predefined messages is
displayed in the Templates menu.
2 Select, and if required, edit the message.
3 Click the soft key Send. The calling party number is
displayed in the handset display.
4 Click the soft key Send. A Message sent confirmation
is displayed and the message is sent to the caller.
5.10 Answering a Text Message with a Predefined Message
1 Press the soft key Reply.
2 Press the soft key More. The Templates option is
displayed.
3 Press the soft key Select. A list of predefined message
templates is displayed.
39 TD 93289EN / / Ver.