User's Manual

PRELIMINARY
Menu Operation
USER MANUAL
Ascom i63 VoWiFi Handset
Alternatively, when in idle mode, press quickly, select PTT group, and then press .
8.1.7 Re-join a PTT Group
Re-join a Group from Call List
If a PTT invitation was received as a call and the user rejected or missed it, the PTT group can be dialed
from the Call list or Missed calls, respectively. The PTT invitation is indicated by the
icon in the list. See
8.1.1 Call List, page 47, or 8.1.2 Missed Calls, page 48.
Re-join a Group from Messaging Inbox
If a PTT invitation was received as a text message and then rejected, the PTT group can be dialed by
selecting the message indicated by the
icon in the Messaging inbox, and then press the Call Soft key.
8.1.8 Call Services
These functions are system dependent. Besides the default Call services functions, 10 extra
system specific call services can be defined – with or without automatic disconnection. The
parameters are set up in the WinPDM/Device Manager, refer to the Configuration Manual, Ascom
i63 VoWiFi Handset, TD 93300EN, and the Installation and Operation Manual, Portable Device
Manager for Windows (WinPDM), TD 92325EN.
Absence Handling
The reason for being absent and the return time can be specified here.
1 Select Call services.
2 Select Absence.
3 Select the applicable absence reason in the list. The
number of absence reasons (for example Lunch,
Meeting, Trip, and so on) are configured in the
WinPDM/Device Manager.
The code is defined when configuring the
absence reason in the handset. For more
information, refer to the Configuration Manual,
Ascom i63 VoWiFi Handset, TD 93300EN.
4 Press Select.
5 Enter time (HHMM) or date (MMDD) depending on the
selected absence reason.
6 Press OK.
The handset sends an absence reason code to the system by establishing a call. The call is automatically
disconnected after a few seconds.
53 TD 93289EN / / Ver.