User's Manual
Table Of Contents
- 1Introduction
- 2Description of the Ascom i63 VoWiFi Handset
- 3Basic Operation
- 4Calling
- 4.1 Open the Call List
- 4.2 Incoming Call
- 4.3 Outgoing Call
- 4.3.1 Pre-Dial
- 4.3.2 Post-Dial with Headset Button
- 4.3.3 Dial Using a Pre-programmed Number
- 4.3.4 Dial a Number from the Call List
- 4.3.5 Dial Last Called Number with Headset Button
- 4.3.6 Dial the Sender of a Message
- 4.3.7 Dial a Number from Contacts
- 4.3.8 Dial a Name from the Central Phonebook
- 4.3.9 Dial a Number from the Company Phonebook
- 4.4 During a Call
- 4.4.1 Adjust the Volume during a Call
- 4.4.2 Open Contacts during a Call
- 4.4.3 Open Messaging Menu during a Call
- 4.4.4 Turn the Microphone On or Off during a Call
- 4.4.5 Lock and Unlock the Keypad during a Call
- 4.4.6 Audio Transfer
- 4.4.7 Start a New Call during Conversation
- 4.4.8 Switch between Calls
- 4.4.9 End a Call
- 4.4.10 Transfer a Call
- 4.4.11 Transfer to New Call
- 4.4.12 Conference Call
- 4.4.13 Call Back
- 4.4.14 Send Call Waiting
- 4.4.15 Answering Call Waiting
- 4.4.16 DTMF
- 4.4.17 Send Data
- 4.5 Loudspeaking Function
- 4.6 Call Diversion
- 4.7 Push-to-Talk Group Call
- 4.8 Emergency Calls
- 5Messaging
- 5.1 Message List
- 5.2 Receive a Message
- 5.2.1 Read a Stored Message
- 5.2.2 Reply to a Message
- 5.2.3 Delete Messages
- 5.2.4 Forward a Message
- 5.2.5 Call the Sender of the Message
- 5.2.6 Call a Number Included in a Message
- 5.2.7 Save Number
- 5.2.8 Message Templates
- 5.2.9 Write and Send a Message
- 5.2.10 Open a Sent Message
- 5.2.11 Review Inbox Content while Reading a Message
- 5.3 Receive a Message with Request for Answer
- 5.4 Message Queuing and Message Priority
- 5.5 Message Priority and Call Priority
- 5.6 Interactive Messaging
- 5.7 Message Indication Repetition
- 5.8 Colored Messaging
- 5.9 Decline a Call with a Predefined Message
- 5.10 Answering a Text Message with a Predefined Message
- 5.11 Calling while Reading a Text Message
- 5.12 Mobile Data
- 5.13 Voicemail
- 6Alarm Operation
- 7Location
- 8Menu Operation
- 9System Profiles
- 10Advanced Functions
- 11Advanced Messaging
- 12System Handling
- 13Operation Notice
- 14Maintenance
- 15Troubleshooting
- 16Energy Efficiency
- 17Related Documents
- 18Revision History
- Appendix ASafety and Regulatory Instructions
- Appendix BMenu Tree
PRELIMINARY
Menu Operation
USER MANUAL
Ascom i63 VoWiFi Handset
Set Alerts for Messages
1 Select Message alert. Different message alerts can be
selected. The handset has eight different message
alerts by default, see Settings, page 105.
2 Select message alert from list. Press Play to listen to
the different sounds.
The option Custom sounds should be
selected to create a customized message
alert. For more information, refer to the
Configuration Manual, Ascom i63 VoWiFi
Handset, TD 93300EN.
The Play Soft key is not available for
Enhanced beep and Custom sound. Instead,
send a message to the handset to listen to
the sound.
3 Press Back.
By default, the message volume follows the ring volume setting. However, a different message volume can
be set if required. For more information, refer to the Configuration Manual, Ascom i63 VoWiFi Handset, TD
93300EN.
Turn the Vibrator On or Off
If the vibrator is activated, it vibrates on incoming calls and messages. In addition, the vibrator can also be
activated when receiving a message during a call. For more information, refer to the Configuration Manual,
Ascom i63 VoWiFi Handset, TD 93300EN.
1 Select Vibrating alert.
Choose between the following:
• On
• On if silent (The vibrator is on only when the
handset is muted.)
• Off
2 Press Back.
Set the Key Sound
This means that every time a key is used, the handset gives a small sound.
1 Select Key sound. Choose between Silent, Click, or
Tone.
2 Select key sound.
3 Press Back.
To listen to the key sound, press the Play Soft key.
67 TD 93289EN / / Ver.