User's Manual
Table Of Contents
- 1Introduction
- 2Description of the Ascom i63 VoWiFi Handset
- 3Basic Operation
- 4Calling
- 4.1 Open the Call List
- 4.2 Incoming Call
- 4.3 Outgoing Call
- 4.3.1 Pre-Dial
- 4.3.2 Post-Dial with Headset Button
- 4.3.3 Dial Using a Pre-programmed Number
- 4.3.4 Dial a Number from the Call List
- 4.3.5 Dial Last Called Number with Headset Button
- 4.3.6 Dial the Sender of a Message
- 4.3.7 Dial a Number from Contacts
- 4.3.8 Dial a Name from the Central Phonebook
- 4.3.9 Dial a Number from the Company Phonebook
- 4.4 During a Call
- 4.4.1 Adjust the Volume during a Call
- 4.4.2 Open Contacts during a Call
- 4.4.3 Open Messaging Menu during a Call
- 4.4.4 Turn the Microphone On or Off during a Call
- 4.4.5 Lock and Unlock the Keypad during a Call
- 4.4.6 Audio Transfer
- 4.4.7 Start a New Call during Conversation
- 4.4.8 Switch between Calls
- 4.4.9 End a Call
- 4.4.10 Transfer a Call
- 4.4.11 Transfer to New Call
- 4.4.12 Conference Call
- 4.4.13 Call Back
- 4.4.14 Send Call Waiting
- 4.4.15 Answering Call Waiting
- 4.4.16 DTMF
- 4.4.17 Send Data
- 4.5 Loudspeaking Function
- 4.6 Call Diversion
- 4.7 Push-to-Talk Group Call
- 4.8 Emergency Calls
- 5Messaging
- 5.1 Message List
- 5.2 Receive a Message
- 5.2.1 Read a Stored Message
- 5.2.2 Reply to a Message
- 5.2.3 Delete Messages
- 5.2.4 Forward a Message
- 5.2.5 Call the Sender of the Message
- 5.2.6 Call a Number Included in a Message
- 5.2.7 Save Number
- 5.2.8 Message Templates
- 5.2.9 Write and Send a Message
- 5.2.10 Open a Sent Message
- 5.2.11 Review Inbox Content while Reading a Message
- 5.3 Receive a Message with Request for Answer
- 5.4 Message Queuing and Message Priority
- 5.5 Message Priority and Call Priority
- 5.6 Interactive Messaging
- 5.7 Message Indication Repetition
- 5.8 Colored Messaging
- 5.9 Decline a Call with a Predefined Message
- 5.10 Answering a Text Message with a Predefined Message
- 5.11 Calling while Reading a Text Message
- 5.12 Mobile Data
- 5.13 Voicemail
- 6Alarm Operation
- 7Location
- 8Menu Operation
- 9System Profiles
- 10Advanced Functions
- 11Advanced Messaging
- 12System Handling
- 13Operation Notice
- 14Maintenance
- 15Troubleshooting
- 16Energy Efficiency
- 17Related Documents
- 18Revision History
- Appendix ASafety and Regulatory Instructions
- Appendix BMenu Tree
PRELIMINARY
USER MANUAL
Ascom i63 VoWiFi Handset
Menu Operation
8.7.2 Keypad Lock Settings
The handset keypad can be locked automatically to minimize the risk of accidentally pressing keys or
buttons while the handset is not in use. The keypad is automatically locked after a lock time parameter Auto
lock time expires.
The alarm button can be pressed while the keypad is locked. Any one of five predefined
emergency numbers can also be called while the keypad is locked as long as this feature has
been configured in the WinPDM/Device Manager. For more information, refer to the Configuration
Manual, Ascom i63 VoWiFi Handset, TD 93300EN..
The automatic key lock can be configured by the administrator in the WinPDM/Device Manager. For more
information, refer to the Configuration Manual, Ascom i63 VoWiFi Handset, TD 93300EN. The user may also
configure the automatic key lock as described in the following sections.
For Automatic key lock, one of the following options may be configured:
• On
The keypad is automatically locked if it is not used before the specified lock time elapses.
• On, except calls
The keypad is automatically locked if it is not used before the specified lock time elapses. If the user is in
a call when the lock time elapses, the keypad remains unlocked until the user has completed the call.
• Off
The keypad is never automatically locked.
The following variables can be specified:
• Auto lock time:
Specifies the time that elapses before the keypad is automatically locked. The shortest time that may be
specified before the key lock is applied is 5 seconds and the longest time is 3 minutes.
• Auto key unlock:
The keypad is automatically unlocked when a call or message is received. When the user has serviced
the call or message, the key lock is reapplied after the specified automatic lock time expires.
Activate the Automatic Key Lock
The user activates the automatic key lock and sets the Auto lock time from the handset Settings menu in
the following way:
1 Select Locks. The Locks menu is displayed.
2 Select Automatic key lock menu item and select On
or On except calls.
The current key lock setting is displayed
under the Automatic key lock menu item.
3 Press the Back Soft key to re-display the Locks menu.
4 Select Auto lock time and press the Select Soft key.
5 Select the required lock time and press the Select Soft
key.
TD 93289EN / / Ver. 68