User's Manual
Table Of Contents
- 1Introduction
- 2Description of the Ascom i63 VoWiFi Handset
- 3Basic Operation
- 4Calling
- 4.1 Open the Call List
- 4.2 Incoming Call
- 4.3 Outgoing Call
- 4.3.1 Pre-Dial
- 4.3.2 Post-Dial with Headset Button
- 4.3.3 Dial Using a Pre-programmed Number
- 4.3.4 Dial a Number from the Call List
- 4.3.5 Dial Last Called Number with Headset Button
- 4.3.6 Dial the Sender of a Message
- 4.3.7 Dial a Number from Contacts
- 4.3.8 Dial a Name from the Central Phonebook
- 4.3.9 Dial a Number from the Company Phonebook
- 4.4 During a Call
- 4.4.1 Adjust the Volume during a Call
- 4.4.2 Open Contacts during a Call
- 4.4.3 Open Messaging Menu during a Call
- 4.4.4 Turn the Microphone On or Off during a Call
- 4.4.5 Lock and Unlock the Keypad during a Call
- 4.4.6 Audio Transfer
- 4.4.7 Start a New Call during Conversation
- 4.4.8 Switch between Calls
- 4.4.9 End a Call
- 4.4.10 Transfer a Call
- 4.4.11 Transfer to New Call
- 4.4.12 Conference Call
- 4.4.13 Call Back
- 4.4.14 Send Call Waiting
- 4.4.15 Answering Call Waiting
- 4.4.16 DTMF
- 4.4.17 Send Data
- 4.5 Loudspeaking Function
- 4.6 Call Diversion
- 4.7 Push-to-Talk Group Call
- 4.8 Emergency Calls
- 5Messaging
- 5.1 Message List
- 5.2 Receive a Message
- 5.2.1 Read a Stored Message
- 5.2.2 Reply to a Message
- 5.2.3 Delete Messages
- 5.2.4 Forward a Message
- 5.2.5 Call the Sender of the Message
- 5.2.6 Call a Number Included in a Message
- 5.2.7 Save Number
- 5.2.8 Message Templates
- 5.2.9 Write and Send a Message
- 5.2.10 Open a Sent Message
- 5.2.11 Review Inbox Content while Reading a Message
- 5.3 Receive a Message with Request for Answer
- 5.4 Message Queuing and Message Priority
- 5.5 Message Priority and Call Priority
- 5.6 Interactive Messaging
- 5.7 Message Indication Repetition
- 5.8 Colored Messaging
- 5.9 Decline a Call with a Predefined Message
- 5.10 Answering a Text Message with a Predefined Message
- 5.11 Calling while Reading a Text Message
- 5.12 Mobile Data
- 5.13 Voicemail
- 6Alarm Operation
- 7Location
- 8Menu Operation
- 9System Profiles
- 10Advanced Functions
- 11Advanced Messaging
- 12System Handling
- 13Operation Notice
- 14Maintenance
- 15Troubleshooting
- 16Energy Efficiency
- 17Related Documents
- 18Revision History
- Appendix ASafety and Regulatory Instructions
- Appendix BMenu Tree
PRELIMINARY
Menu Operation
USER MANUAL
Ascom i63 VoWiFi Handset
Deactivate the Automatic Key Lock
1 Select Locks. The Locks menu is displayed.
2 Select Automatic key lock menu item and select Off.
Automatic Key Unlock
The user can configure a locked keypad to unlock automatically when a call or message is received. After
the user has serviced the call or message, the keypad is locked again after the specified Auto lock time
expires.
8.7.3 Phone Lock Settings
The handset can be protected for unauthorized use by activating the phone lock.
The phone lock may be set to the following:
• On
The handset is automatically locked if not used for the specified automatic lock time or when it is first
turned on.
• On in charger
The handset is locked immediately when placed in the charger. When removed from the charger and
unlocked by the PIN, the handset remains unlocked.
• Off
The handset is never locked.
The default phone lock PIN code (0000) can be changed to any 4–8 digit personalized code.
The length of time before the handset locks automatically is set by the Auto lock time parameter. The
shortest time that can be set before the handset locks is 5 seconds and the longest time is 3 minutes.
If configured in the WinPDM/Device Manager, any one of up to five emergency numbers can be
called while the handset is locked. For more information, refer to the Configuration Manual, Ascom
i63 VoWiFi Handset, TD 93300EN.
Activate the Phone Lock
The phone lock settings are activated from the handset Settings menu in the following way:
1 Select Locks.
2 Select Phone lock.
3 Select Auto phone lock.
4 Select On or On in charger.
5 Enter PIN code.
6 Press OK.
7 Press the Back Soft key twice to return to Locks.
8 Select Auto lock time.
69 TD 93289EN / / Ver.