User's Manual
Table Of Contents
- 1Introduction
- 2Description of the Ascom i63 VoWiFi Handset
- 3Basic Operation
- 4Calling
- 4.1 Open the Call List
- 4.2 Incoming Call
- 4.3 Outgoing Call
- 4.3.1 Pre-Dial
- 4.3.2 Post-Dial with Headset Button
- 4.3.3 Dial Using a Pre-programmed Number
- 4.3.4 Dial a Number from the Call List
- 4.3.5 Dial Last Called Number with Headset Button
- 4.3.6 Dial the Sender of a Message
- 4.3.7 Dial a Number from Contacts
- 4.3.8 Dial a Name from the Central Phonebook
- 4.3.9 Dial a Number from the Company Phonebook
- 4.4 During a Call
- 4.4.1 Adjust the Volume during a Call
- 4.4.2 Open Contacts during a Call
- 4.4.3 Open Messaging Menu during a Call
- 4.4.4 Turn the Microphone On or Off during a Call
- 4.4.5 Lock and Unlock the Keypad during a Call
- 4.4.6 Audio Transfer
- 4.4.7 Start a New Call during Conversation
- 4.4.8 Switch between Calls
- 4.4.9 End a Call
- 4.4.10 Transfer a Call
- 4.4.11 Transfer to New Call
- 4.4.12 Conference Call
- 4.4.13 Call Back
- 4.4.14 Send Call Waiting
- 4.4.15 Answering Call Waiting
- 4.4.16 DTMF
- 4.4.17 Send Data
- 4.5 Loudspeaking Function
- 4.6 Call Diversion
- 4.7 Push-to-Talk Group Call
- 4.8 Emergency Calls
- 5Messaging
- 5.1 Message List
- 5.2 Receive a Message
- 5.2.1 Read a Stored Message
- 5.2.2 Reply to a Message
- 5.2.3 Delete Messages
- 5.2.4 Forward a Message
- 5.2.5 Call the Sender of the Message
- 5.2.6 Call a Number Included in a Message
- 5.2.7 Save Number
- 5.2.8 Message Templates
- 5.2.9 Write and Send a Message
- 5.2.10 Open a Sent Message
- 5.2.11 Review Inbox Content while Reading a Message
- 5.3 Receive a Message with Request for Answer
- 5.4 Message Queuing and Message Priority
- 5.5 Message Priority and Call Priority
- 5.6 Interactive Messaging
- 5.7 Message Indication Repetition
- 5.8 Colored Messaging
- 5.9 Decline a Call with a Predefined Message
- 5.10 Answering a Text Message with a Predefined Message
- 5.11 Calling while Reading a Text Message
- 5.12 Mobile Data
- 5.13 Voicemail
- 6Alarm Operation
- 7Location
- 8Menu Operation
- 9System Profiles
- 10Advanced Functions
- 11Advanced Messaging
- 12System Handling
- 13Operation Notice
- 14Maintenance
- 15Troubleshooting
- 16Energy Efficiency
- 17Related Documents
- 18Revision History
- Appendix ASafety and Regulatory Instructions
- Appendix BMenu Tree
PRELIMINARY
Menu Operation
USER MANUAL
Ascom i63 VoWiFi Handset
2 Select in the menu, and press the confirmation
button or the Soft key Select.
8.8.1 Bluetooth Headset
Introduction
Bluetooth technology replaces the cord between the handset and the headset. This allows the user to
move more freely and eliminates the risk of a headset cord getting stuck.
The supported Bluetooth functions are the following:
• Pair the handset with its headset.
• Choose which device to use when making a call.
• Play ring signal in the Bluetooth Headset.
• Answer and connect sound to the Bluetooth Headset when answering with the headset’s button.
• End call with the Bluetooth headset’s button.
• Transfer audio to/from Bluetooth headset during call, using the menu in the handset.
• Increase/decrease the volume in the Bluetooth headset with the volume buttons on the handset.
Icon
See 2.4 Icons and Text in the Display, page 9.
8.8.2 Wired Headset
To achieve optimal audio quality with the different headset types, it is recommended to select the
corresponding headset profile.
The default setting is microphone on a boom, that is, the audio is optimized for using a headset with
microphone on a boom.
To change the headset profile, perform as follows:
1 Press the Menu Soft key, or Confirmation on the
Navigation key.
2 Select Connections.
3 Select Headset with the Select Soft key or Confirma-
tion on the Navigation key.
4 Select the corresponding headset profile from the list,
that is, Mic on boom, Mic on cable, Hearing
protection, or Customized headset profile (only
visible if the headset profile has been configured in
the WinPDM/Device Manager).
5 Press Select or Confirmation on the Navigation key.
75 TD 93289EN / / Ver.