User's Manual
Table Of Contents
- 1Introduction
- 2Description of the Ascom i63 VoWiFi Handset
- 3Basic Operation
- 4Calling
- 4.1 Open the Call List
- 4.2 Incoming Call
- 4.3 Outgoing Call
- 4.3.1 Pre-Dial
- 4.3.2 Post-Dial with Headset Button
- 4.3.3 Dial Using a Pre-programmed Number
- 4.3.4 Dial a Number from the Call List
- 4.3.5 Dial Last Called Number with Headset Button
- 4.3.6 Dial the Sender of a Message
- 4.3.7 Dial a Number from Contacts
- 4.3.8 Dial a Name from the Central Phonebook
- 4.3.9 Dial a Number from the Company Phonebook
- 4.4 During a Call
- 4.4.1 Adjust the Volume during a Call
- 4.4.2 Open Contacts during a Call
- 4.4.3 Open Messaging Menu during a Call
- 4.4.4 Turn the Microphone On or Off during a Call
- 4.4.5 Lock and Unlock the Keypad during a Call
- 4.4.6 Audio Transfer
- 4.4.7 Start a New Call during Conversation
- 4.4.8 Switch between Calls
- 4.4.9 End a Call
- 4.4.10 Transfer a Call
- 4.4.11 Transfer to New Call
- 4.4.12 Conference Call
- 4.4.13 Call Back
- 4.4.14 Send Call Waiting
- 4.4.15 Answering Call Waiting
- 4.4.16 DTMF
- 4.4.17 Send Data
- 4.5 Loudspeaking Function
- 4.6 Call Diversion
- 4.7 Push-to-Talk Group Call
- 4.8 Emergency Calls
- 5Messaging
- 5.1 Message List
- 5.2 Receive a Message
- 5.2.1 Read a Stored Message
- 5.2.2 Reply to a Message
- 5.2.3 Delete Messages
- 5.2.4 Forward a Message
- 5.2.5 Call the Sender of the Message
- 5.2.6 Call a Number Included in a Message
- 5.2.7 Save Number
- 5.2.8 Message Templates
- 5.2.9 Write and Send a Message
- 5.2.10 Open a Sent Message
- 5.2.11 Review Inbox Content while Reading a Message
- 5.3 Receive a Message with Request for Answer
- 5.4 Message Queuing and Message Priority
- 5.5 Message Priority and Call Priority
- 5.6 Interactive Messaging
- 5.7 Message Indication Repetition
- 5.8 Colored Messaging
- 5.9 Decline a Call with a Predefined Message
- 5.10 Answering a Text Message with a Predefined Message
- 5.11 Calling while Reading a Text Message
- 5.12 Mobile Data
- 5.13 Voicemail
- 6Alarm Operation
- 7Location
- 8Menu Operation
- 9System Profiles
- 10Advanced Functions
- 11Advanced Messaging
- 12System Handling
- 13Operation Notice
- 14Maintenance
- 15Troubleshooting
- 16Energy Efficiency
- 17Related Documents
- 18Revision History
- Appendix ASafety and Regulatory Instructions
- Appendix BMenu Tree
PRELIMINARY
USER MANUAL
Ascom i63 VoWiFi Handset
Menu Operation
If the preconfigured headset profiles do not match the headset in use, or the audio performance is bad, an
own headset profile can be configured. This is done in the Device Manager, refer to the Installation and
Operation Manual, Portable Device Manager for Windows (WinPDM), TD 92325EN. If an own profile is
configured in the Device Manager, the profile is selectable in the handset menu.
8.8.3 Network
1 Enter the menu by pressing the Menu Soft key.
2 Select Connections
in the menu.
3 Select Network.
4 Select network in the list. The handset restarts if the
network is changed.
8.8.4 In Charger Action
The behavior of the handset when placed in the charger can be configured.
End Call
The handset can be configured to end an ongoing call when placed in a charger.
1 On the Connections
menu, select In charger.
2 Select Call behavior.
3 Select End call.
Turn Loudspeaker On
The handset can be configured to turn on the loudspeaker when placed in a charger during a call.
1 On the Connections
menu, select In charger.
2 Select Call behavior.
3 Select Loudspeaker on.
Switch the Handset Off
The handset can be switched off automatically when it is placed in the charger. When it is removed from the
charger, it switches on again.
When the handset is switched off in the charger, the Owner ID of the handset is shown. This simplifies the
identification of the handset when, for example, charging it together with other handsets.
1 On the Connections
menu, select In charger.
2 Select Other actions.
TD 93289EN / / Ver. 76