User's Manual
Table Of Contents
- 1Introduction
- 2Description of the Ascom i63 VoWiFi Handset
- 3Basic Operation
- 4Calling
- 4.1 Open the Call List
- 4.2 Incoming Call
- 4.3 Outgoing Call
- 4.3.1 Pre-Dial
- 4.3.2 Post-Dial with Headset Button
- 4.3.3 Dial Using a Pre-programmed Number
- 4.3.4 Dial a Number from the Call List
- 4.3.5 Dial Last Called Number with Headset Button
- 4.3.6 Dial the Sender of a Message
- 4.3.7 Dial a Number from Contacts
- 4.3.8 Dial a Name from the Central Phonebook
- 4.3.9 Dial a Number from the Company Phonebook
- 4.4 During a Call
- 4.4.1 Adjust the Volume during a Call
- 4.4.2 Open Contacts during a Call
- 4.4.3 Open Messaging Menu during a Call
- 4.4.4 Turn the Microphone On or Off during a Call
- 4.4.5 Lock and Unlock the Keypad during a Call
- 4.4.6 Audio Transfer
- 4.4.7 Start a New Call during Conversation
- 4.4.8 Switch between Calls
- 4.4.9 End a Call
- 4.4.10 Transfer a Call
- 4.4.11 Transfer to New Call
- 4.4.12 Conference Call
- 4.4.13 Call Back
- 4.4.14 Send Call Waiting
- 4.4.15 Answering Call Waiting
- 4.4.16 DTMF
- 4.4.17 Send Data
- 4.5 Loudspeaking Function
- 4.6 Call Diversion
- 4.7 Push-to-Talk Group Call
- 4.8 Emergency Calls
- 5Messaging
- 5.1 Message List
- 5.2 Receive a Message
- 5.2.1 Read a Stored Message
- 5.2.2 Reply to a Message
- 5.2.3 Delete Messages
- 5.2.4 Forward a Message
- 5.2.5 Call the Sender of the Message
- 5.2.6 Call a Number Included in a Message
- 5.2.7 Save Number
- 5.2.8 Message Templates
- 5.2.9 Write and Send a Message
- 5.2.10 Open a Sent Message
- 5.2.11 Review Inbox Content while Reading a Message
- 5.3 Receive a Message with Request for Answer
- 5.4 Message Queuing and Message Priority
- 5.5 Message Priority and Call Priority
- 5.6 Interactive Messaging
- 5.7 Message Indication Repetition
- 5.8 Colored Messaging
- 5.9 Decline a Call with a Predefined Message
- 5.10 Answering a Text Message with a Predefined Message
- 5.11 Calling while Reading a Text Message
- 5.12 Mobile Data
- 5.13 Voicemail
- 6Alarm Operation
- 7Location
- 8Menu Operation
- 9System Profiles
- 10Advanced Functions
- 11Advanced Messaging
- 12System Handling
- 13Operation Notice
- 14Maintenance
- 15Troubleshooting
- 16Energy Efficiency
- 17Related Documents
- 18Revision History
- Appendix ASafety and Regulatory Instructions
- Appendix BMenu Tree
PRELIMINARY
Maintenance
USER MANUAL
Ascom i63 VoWiFi Handset
Figure 15. Replace the Battery
14.2 Easy Replacement of Handset
Easy replacement can be used if a handset needs to be replaced due to, for example, a broken display. The
easy replacement procedure is done via the handset display.
Easy replacement is not supported when using DP1 Desktop Programmer.
The following settings are replaced during easy replacement:
• User parameters (including User ID)
• Contacts
• The extension number is assigned to the new handset.
The following settings are not replaced during the easy replacement:
• Call list
• Messages
• Bluetooth pairing list
• Licenses.
87 TD 93289EN / / Ver.