ABM-EVO-IV - Front Panel Facilities BASS INPUT MIDDLE TREBLE D.I. PUSH FLAT/SHAPE OUTPUT PRE/POST E.Q INSTRUMENT VALVE 9 BAND DYNAMIC SUB DRIVE PLUS EQUALISATION COMPRESSION HARMONICS TUNER LINE OUT MUTE PASSIVE/ACTIVE INPUT LEVEL OUTPUT MUTE OUTPUTS THANK YOU Thank you for purchasing your Ashdown Engineering Amplifier and welcome to the family! We really think you’ve made the right choice and know that this amplifier will give you years of great tone and service.
ABM-EVO-IV - Front Panel Facilities INPUT BASS MIDDLE TREBLE D.I. PUSH FLAT/SHAPE OUTPUT PRE/POST E.Q INSTRUMENT VALVE 9 BAND DYNAMIC SUB DRIVE PLUS EQUALISATION COMPRESSION HARMONICS TUNER LINE OUT MUTE PASSIVE/ACTIVE INPUT LEVEL the two sets of sliders interposed between these controls set in their centre positions and using only the BASS, MIDDLE and TREBLE controls to alter the overall tone. Secondly, if more control is required then the sliders can also be used to tailor the E.Q.
ABM-EVO-IV - Rear Panel Facilities POWER OFF MODEL # SERIAL # FOOT-SWITCH LINE INPUT ASHDOWN FS-4 ON 50/60Hz FX SEND FX RETURN SPEAKER OUTPUTS MIN LOAD = 4 OHMS CLASS 2 WIRING FUSE 115V-T8A 230V-T4A POWER CONSUMPTION - 700W SPECIFICATIONS INPUTS High Input Low Input Line Input Effects Return Impedance 3.
ABM-EVO-IV-600H & 600RC - Suggested Rigs ABM-EVO-IV-1200H - Suggested Rigs We recommend using Neutrik speakon cables to connect your Ashdown ABM-EVO-IV to your selected cabinet.
ABM-EVO-IV - Suggested Settings ABM-EVO-IV - Suggested Settings The best suggestion we can make is to sit with your amp with your bass and get the best sounds to suit your style. However we have put forward a few sample settings to get you started. These settings will vary from instrument to instrument..... ROCK REGGAE INPUT BASS MIDDLE TREBLE D.I.
