www.ashdownmusic.
USER MANUAL VALVE CTM-15 Demo Video: Thank you Thank you for purchasing your Ashdown Engineering Amplifier and welcome to the family! We really think you’ve made the right choice and know that this amplifier will give you years of great tone and service. It is a machine though and needs to be looked after, please read through this user manual which will help you get the most out of your new Amp and keep it running as long as some of our happiest and very famous customers.
USER MANUAL VALVE CTM-300 CTM-100 VU FACILITIES AND CONTROLS (note that these vary according to the model) INPUTS There are two instrument inputs marked LOW and HIGH. The LOW input is highly sensitivity and also high impedance to suit the output from PASSIVE (Low Output) basses - The HIGH input is low sensitivity and lower impedance to suit the output from ACTIVE (High Output) basses.
USER MANUAL VALVE CTM-30 CTM-15 Tech Spec: REAR PANEL FACILITIES DI OUTPUT This 1/4” stereo jack socket is used to connect the amplifier to a low impedance, balanced input on a PA system or recording mixer. The signal can be taken PRE or POST EQ (see above), ie with or without the tone shaping added by the EQ section of the amplifier. On the CTM30 the DI is derived directly from the output transformer and therefore is an exact copy of the sound that you here.
USER MANUAL VALVE CTM-300/100 THE VU METER WILL STILL WORK AT REDUCED POWER IDEAL SETTING KEEP OUT! DO NOT SET ANY TUBE THIS HIGH The VU meter fitted to the CTM is a dual function meter detailed as follows: By using the push button selector switch marked “AUDIO / BIAS” the functions are accessed in the following manner: 1/ “AUDIO” - In audio mode the meter is set to read the audio output of each of the six power tubes and each can be measured by utilising the rotary selector switch on the front panel.
USER MANUAL VALVE NOTES: 10 www.ashdownmusic.com www.ashdownmusic.
USER MANUAL VALVE CTM-300 CTM-100 VU EINRICHTUNGEN UND EINSTELLUNGEN (beachten Sie, dass diese je nach Modell variieren) INPUTS Es gibt zwei Eingänge für Instrumente die mit LOW-und HIGH gekennzeichnet sind. Der LOW-Eingang ist sehr empfindlich und hat auch eine hohe Impedanz um den Ausgang von passiven (Low Output) Bässen zu entsprechen. Der HIGH-Eingang ist weniger empfindlich und hat eine niedrigere Impedanz um an den Ausgang von aktiven (High Output) Bässe zu entsprechen.
USER MANUAL VALVE CTM-30 CTM-15 Tech Spec: RÜCKSEITE MIT EINRICHTUNGEN D.I. OUTPUT - Diese 1/4 “-Stereo-Klinkenbuchse dient dazu, den Verstärker mit einem niedrigen Impedanz und symmetrischen Eingang an einem PA-System oder einem Aufnahme Mischpult anzuschließen. Das Signal kann vor oder nach den EQ (siehe oben) geleitet werden. Zum Beispiel: mit oder ohne Ton hinzugefügter Formgebung durch die EQ des Verstärkers erfolgt. Auf der CTM30 wird die D.I.
USER MANUAL VALVE CTM-300/100 THE VU METER WILL STILL WORK AT REDUCED POWER IDEAL SETTING KEEP OUT! DO NOT SET ANY TUBE THIS HIGH VU METER - Das VU-Meter bietet eine visuelle Anzeige der Ausgangspegel des Verstärkers. Es wirkt auch als Vorspannungsmessgerät (nicht auf CTM15). Sehen Sie auf der folgenden Seite für weitere Details nach.
USER MANUAL VALVE NOTES: 18 www.ashdownmusic.com www.ashdownmusic.
USER MANUAL VALVE CTM-300 CTM-100 VU FACILITIES AND CONTROLS (note that these vary according to the model) INPUTS There are two instrument inputs marked LOW and HIGH. The LOW input is highly sensitivity and also high impedance to suit the output from PASSIVE (Low Output) basses - The HIGH input is low sensitivity and lower impedance to suit the output from ACTIVE (High Output) basses.
USER MANUAL VALVE CTM-30 CTM-15 Tech Spec: REAR PANEL FACILITIES DI OUTPUT This 1/4” stereo jack socket is used to connect the amplifier to a low impedance, balanced input on a PA system or recording mixer. The signal can be taken PRE or POST EQ (see above), ie with or without the tone shaping added by the EQ section of the amplifier. On the CTM30 the DI is derived directly from the output transformer and therefore is an exact copy of the sound that you here.
USER MANUAL VALVE CTM-300/100 THE VU METER WILL STILL WORK AT REDUCED POWER IDEAL SETTING KEEP OUT! DO NOT SET ANY TUBE THIS HIGH The VU meter fitted to the CTM is a dual function meter detailed as follows: By using the push button selector switch marked “AUDIO / BIAS” the functions are accessed in the following manner: 1/ “AUDIO” - In audio mode the meter is set to read the audio output of each of the six power tubes and each can be measured by utilising the rotary selector switch on the front panel.
USER MANUAL VALVE Une valeur de compression élevée peut être utilisée comme un effet mais elle aura tendance à réduire la dynamique de votre jeu de manière à ce que le volume des notes reste le même, que les cordes soient jouées plus ou moins durement. La compression permet également d’ajouter du sustain aux notes jouées en maintenant leur volume les rendant ainsi plus longues. Le potentiomètre ajuste le niveau de compression appliquée.
www.ashdownmusic.
