Instructions / Assembly

1A
2
Outlet Box
Outlet Box
Mounting Ball
Mounting Ball
SAFETY INFORMATION
GENERAL INSTALLATION GUIDE FOR WALL LANTERN
Please read and understand this entire manual before attempting to assemble, install or operate the product.
WARNING
• RISK OF ELECTRIC SHOCK - Before beginning installation, turn off electricity at the circuit breaker box or the main fuse box.
• RISK OF FIRE - Use bulbs specified by the markings and/or labels on the fixture.
CAUTION
• For your safety, read instructions completely before beginning installation.
• If in doubt about electrical installation, consult a licensed electrician.
• Turn off electricity to fixture before replacing the bulb(s).
CARE AND MAINTENANCE
When installing a wall lantern there are 3 different mounting methods listed below as A, B, C. Select the appropriate
method based on the crossbar included.
• Wipe clean using soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives to clean fixture as they may damage the finish.
Black (or red) wire from supply
Ground wire from supply
White from fixture
Black from fixture
Ground wire
from fixture
Green ground screw
White wire from supply
1C
1B
3A 3B
3C 4
Outlet Box
Install Bulb and Glass Shade
Install correct bulbs referring to fixture markings
and/or labels for maximum wattage.
Your installation is now complete! Restore
electricity and save this sheet for future
reference.
Other type of Crossbar
may provided
Other type of Crossbar
may provided