Installation Guide

25
FREESTANDING LEGS INSTALLATION
To make this model free standing using cast legs, follow the instructions below:
1. Place heater on its back.
2. Your heater is equipped with four leg mounting nuts. Place a leg at each nut and secure leg with bolts
provided.
3. The legs are equipped with leveling bolts needed for leveling adjustments.
4. Stand heater to upright position. Place heater in desired location. At this point you may want to secure
pedestal to oor with screws or an “ell” bracket.
5. Hook up gas supply line. Check for leaks with mild soapy water. see “Installation Clearances and Gas
Connection” section of this manual.