Specifications

English

• Folder: Choose a folder where you want to store the

layer you are creating. This choice should be made in

conjunction with the choice of the storage medium

(see Location).

The None option stands for either the “My Documents”

folder or the “Storage Disk” folder in the main memory,

or the root folder of the storage card. All other options

available in the drop-down menu will be a sub-folder of

the “My Documents” folder or the “Storage Disk”

folder in the main memory, or the root folder of the

storage card.

If you want to use a special folder to store your layers,

first create it using File Explorer. You can only create

new folders in the “My Documents” folder, in the

“Storage Disk” folder or on the storage card.

• Type: Choose the type and/or format of the layer you

want to create:

SHP layer: Depending on your choice the layer will

hold 2D/3D points, 2D/3D lines, or 2D/3D polygons.

MIF layer (can hold any type of feature).

CSV layer (point feature type only).

• Location: Choose the storage medium where you want

to store the layer. You can choose either “Main

memory” or “Storage Card” (if there is an SD, or micro-

SD card inserted in the receiver). With MobileMapper

100, a third option is available (physically located in

the resident memory and named “Storage Disk”).

3. Tap the Save button to proceed. If you are defining the

second or next layers, go directly to step 5. If you are

defining the first layer in the open job, the program will

first ask you to define a coordinate system for the job:

• First field: Choose the country you are working in. You

may also choose a worldwide system such as UTM or

Worldwide Geodetic System.

• Second field: The number of options available in this

field depends on the selected country. Select the

datum that is suitable for your job.