Specifications

English
7
How to Hold the
Receiver
Tracking satellites with your receiver requires that you use the
receiver outdoor and hold it in an appropriate manner.
The receiver will have the best view of the sky when you hold
it at an angle of around 45 degrees from horizontal and not
too close to your body.
You can check that your receiver is tracking enough satellites
by running the GNSS Toolbox, and more particularly the
GNSS Status function (see GNSS Status on page 11). When
enough satellites are tracked, you can start using your
receiver and run your application software.
Turning the
Receiver Off
After you have finished your work, turn off your receiver by
holding the Power button [1] pressed until a Warning
message is displayed on the screen asking you to confirm the
power-off request. Tap Yes. The receiver will shut down in the
next couple of seconds after a duo-tone sound has been
heard.