Specifications

English
34
•Tap OK to complete the rover configuration step. Tap OK
again to return to the map screen.
• Select Menu>Initialize and choose your initialization
method/
– If you select “On the Fly”, or “From Bar”, nothing else
needs to be done at this stage.
– If you select “From Known Point”, choose that point
from the displayed list and stay there for a while.
– If you select “From Bar”, keep the rover antenna on the
bar for a while, then carefully move this antenna to the
top of the pole or bipod, taking care not to mask it.
– If you select “Statically”, stay immobile for a while
with your rover.
• Wait until the receiver returns the “FIXED” indication in
the status bar.
•Tap Menu>Stakeout.
• Select the first target from the displayed list. The map
screen then indicates the path to take you to that point.
[1]: Selected stakeout point (target).
[2]: Direct path to the stakeout point from your location.
[3]: Your current location.
[4]: Instructions to help you get closer to the target (West/
East, North/South). If the voice guidance is activated (see
Menu>Options, Voice tab), this information will be
replicated at regular intervals of time in the form of voice
messages. A Cut/Fill information, in meters, is also
provided on the screen indicating the difference of height
between the current location and the project stakeout
point. (Cut value given if current location higher than
stakeout point, fill value is given otherwise).
[1]
[8]
[2]
[3]
[4]
[5] [6]
[7]