Instruction manual
Introduction Page 5
Introduction
Specifications and Options
Technical Specifications
Table 1.2 lists the technical specifications of the sensor.
Optional Features
Table 1.3 lists the available options. Each option is represented by a letter or number
presented in a certain order. You can verify the installed options by issuing the
following command to the sensor using an external handheld controller or PC, as
described in Chapter 4, Command Response Formats:
• $PASHQ,SCRN,8
The command will display the options on the external handheld controller or PC with
some non-ASCII characters at the beginning and end of the string which you can
ignore. For example:
...ZM,30,4J00,C05,1C63XDP12M-Q-LJ....
Table 1.2: Technical Specifications
Characteristic Specifications
Tracking 12 channels L1 CA/PL1 and PL2
Size 3.9H x 6.3"W x 8.8"D
Weight 5.5 lb
Operating temperature -20° to +55°C
Storage temperature -30° to +75°C
Environment Wind-driven rain and dust to MIL-STD-810E
Case Aluminum
Power consumption 12 watts
Power input 10-32 VDC via two power connectors
Data storage Optional 1, 3, 6, or 10MB memory board
Interface One dual-color LED
Three RS-232 ports via DB9 connectors
One antenna port
Event marker and 1PPS via serial port connector
Mounting Plate with 4 holes