Instruction manual

Page 76 Z-12 Real-Time Sensor Operation and Reference Manual

initialization command $PASHS,INI.

CYCLE TIME Fast CPD update rate: 1 sec - no Q

option

0.5 sec - Q

option and

internal

memory

cleared

1 or 0.2

second - Q

option and

internal

memory not

cleared (RZ

only)

SATELLITE SELECTION

AUTO SELECTION Track all satellites flagged Y or

locked satellites only N

INDIVIDUAL SATELLITES Select or track this satellite (max 12 SVs at one time) Y

SITE AND SESSION CONTROL

SITE Name of measured site (4 alphanumeric characters) ????

SESS ID of session (alphanumeric character) -

RCV# Receiver ID number (3 alphanumeric characters) -

ANT# Antenna ID number (3 alphanumeric characters)

MMDD Month and day of session -

OPR ID of operator (3 alphanumeric characters) -

CODE User comments (up to 13 alphanumeric characters) -

OTHER PARAMETERS

USE GROUP DELAY Subtract navigation group delay from satellite clock

offset

Yes

KEEP SAVED USER SETUP No

Keep daisy chain setup of

serial port

Photogrammetry event

signal

Active rising

Table 4.21: Parameters Reset by RST Command (continued)

Parameter Description Default Value