Installation Guide

Fig. 11
Fig. 12: Outswing Patio Door Sill
H) Apply sealant to the interior side of the head and side nail fin. Apply a 1/4" continuous bead
of silicone in line with and completely covering the nail fin holes. (Fig. 11)
I) Apply sealant to sill rough opening:
a. Apply three 1/4” continous beads of silicone across the entire width of the rough
opening. Note that the locations are different for each door type. Fig. 13 shows the
silicone location for a 4 9/16” and 6 9/16” inswing door. The bead location will be
different for other jamb sizes. (Fig. 12 & 13)
b. Apply a 1/4" continuous bead of silicone 1/2" from each side of the rough opening. The
bead will run the entire depth of the jamb starting at the face of the wall. (Fig. 14)
Fig. 13: 4 9/16” & 6 9/16” Inswing Patio Door