Specifications Sheet

AMERICAN SPECIALTIES, INC.
441 Saw Mill River Road, Yonkers, NY 10701
[phone] • [phone]
www.americanspecialties.com
THIS MANUFACTURER RESERVES THE RIGHT TO MAKE CHANGES IN DESIGN OR DIMENSIONS WITHOUT FORMAL NOTICE
TURBO PRO™ HIGH-SPEED HAND DRYER WITH HEPA FILTER (PAGE 1 OF 2)
MODEL №: 0196
ISSUED: 26 JAN 2018
REVISED: 30 AUG 2018
SPECIFICATION
TURBO PRO™ High-Speed Hand Dryer with HEPA filter shall operate automatically from IR sensor activated by beam
reflection from objects placed in sensing zone. Motor and heating element shall have internal resetting automatic thermal
protection. Unit shall develop 32-42 CFM (55-72 m
3
/h) of heated air and shall provide drying time of less than 15 seconds.
Warm air output temperature and velocity shall be adjustable by owner. Cover shall be heavy-duty, one piece formed
stainless steel 1/16" [1.5] with all exposed surfaces satin finished or one piece formed steel 1/16" [1.5] thick with all exposed
surfaces having white porcelain enamel or matte black powder coated finish (by option specified). Fixed directional air
nozzle shall be heavy-duty, rust proof and highly tamper resistant. Air intake slots shall not allow access to internal parts.
Circuitry shall have self-adjusting time-out and fail-safe off protection controlled by a microprocessor that shall detect and
reject false signals and shall automatically self-calibrate to provide uniform sensitivity over its entire life span. Sensitivity
shall be adjustable by owner to suit mounting conditions and intended usage population. Entire unit shall be internally
electrically grounded. Motor speed shall be adjustable by owner in range between maximum power and maximum
efficiency. Dryer unit shall have C-UL-US
®
, CE, and TÜV approval and be listed under the re-examination services of
Underwriters Laboratories, Inc. Unit shall be warranted against defects in materials or workmanship for five (5) years.
TURBO PRO™ High Speed Hand Dryer With HEPA Filter shall be Model № 0196-___{specify voltage suffix}-____
{specify color option if other than white} of American Specialties, Inc., 441 Saw Mill River Road, Yonkers, NY 10701-
4913
INSTALLATION
Surface mount unit on wall with four (4) 1/4" [6.4] washers and screws or bolts (supplied) through holes (provided) in a
corrosion protected steel back plate into suitable prepared mountings (by others) or other suitable mounting hardware (by
others) to suit wall conditions. Electrical service is supplied and connected (by others) prior to installing cover. Cover is
secured to back plate with recessed, pin-hex socket head cap screws (supplied) on bottom. For compliance with ICC/ANSI A
-117.1-2003 and 2010 ADA Accessibility Standards for adults, install unit with bottom of sensor lens 48" [1219] MAX AFF
if unobstructed reach access is provided or 44" [1118] MAX AFF if forward reach over an obstruction (e.g. vanity or
commode) with reach depth greater than 20" [508] and less than 25" [635] is only provided. For general utility, install unit so
that sensor lens is 44" [118] to 54" [1372] AFF.
OPERATION
Activate dryer by placing hands under sensor. Dryer automatically shuts off after user removes hands from sensor zone.