Specifications Sheet

AMERICAN SPECIALTIES, INC.
441 Saw Mill River Road, NY 10701
[phone] • [phone]
www.americanspecialties.com
THIS MANUFACTURER RESERVES THE RIGHT TO MAKE CHANGES IN DESIGN OR DIMENSIONS WITHOUT FORMAL NOTICE
SPECIFICATION
ADA Compliant Surface Mounted High-Speed Hand Dryer shall operate automatically from IR sensor activated by beam
reflection from objects placed in sensing zone. Motor and heating element shall have internal resetting automatic thermal
protection. Unit shall develop 60 CFM (102 m
3
/h) of heated air and shall provide drying time of less than 15 seconds.
Cover shall be heavy-duty, one piece formed 18 gage stainless steel bright or satin finished on all exposed surfaces (by
option specified) or heavy-duty, one piece formed 18 gage steel finished on all exposed surfaces with white porcelain
enamel. Fixed directional air nozzle shall be heavy-duty, rust proof and highly tamper resistant. Air intake slots shall not
allow access to internal parts. Circuitry shall have self-adjusting time-out and fail-safe off protection controlled by a
microprocessor that shall detect and reject false signals and shall automatically self-calibrate to provide uniform sensitivity
over its entire life span. Entire unit shall be internally electrically grounded. Dryer unit shall have C-UL-US
®
and CE
approval and be listed under the re-examination services of Underwriters Laboratories, Inc. Unit shall be warranted against
defects in materials or workmanship for five (5) years. Complete Owner’s Manual (OM) and Installation Guide (IG) shall be
provided with unit.
ADA Compliant Surface Mounted High-Speed Hand Dryer shall be Model № 0199 of American Specialties, Inc., 441
Saw Mill River Road, Yonkers, NY 10701-4913
INSTALLATION
Surface mount unit on wall with four (4) 1/4" washers and screws or bolts (supplied) through holes (provided) in a corrosion
protected steel back plate into suitable prepared mountings (by others) or other suitable mounting hardware (by others) to
suit wall conditions. Electrical service is supplied and connected (by others) prior to installing cover. Cover is secured to
back plate with recessed, pin-hex pan head cap screws (supplied) opened with security wrench (supplied). For compliance
with ICC/ANSI A-117.1-2003 and 2010 ADA Accessibility Standards for adults install unit with bottom of sensor lens
48" (1219) maximum above finished floor (MAX AFF) if unobstructed reach access is provided or 44" (1118) MAX AFF if
forward reach over an obstruction (e.g. vanity or commode) with reach depth greater than 20" (508) and less than 25" (635)
is only provided. For general utility install unit so that sensor lens is 44" to 54" (1118 to 1372) AFF. Mounting Template and
Installation Guide (MT & IG) is supplied with unit.
ADA COMPLIANT SURFACE MOUNTED HIGH-SPEED DRYER ( 1 OF 2)
MODEL №: 0199
ISSUED: 10/12
REVISED: 03 Oct 2013