Specifications Sheet
AMERICAN SPECIALTIES, INC.
441 Saw Mill River Road, Yonkers, NY 10701
(914) 476.9000 • (914) 476.0688
www.americanspecialties.com
THIS MANUFACTURER RESERVES THE RIGHT TO MAKE CHANGES IN DESIGN OR DIMENSIONS WITHOUT FORMAL NOTICE
SURFACE MOUNTED PAPER TOWEL DISPENSER
MODEL №: 0245-SS
ISSUED: 1-87
REVISED: 27 OCT 2016
SPECIFICATION
Surface Mounted Paper Towel Dispenser shall hold and dispense 400 standard single-fold paper towels and shall
be fabricated of 22 gauge type 304 stainless steel alloy 18-8. Towel dispensing slot shall have a fully deburred
edge for snag-free dispensing and user safety. Dispenser door shall be attached to bottom of unit with a full length
3/16" dia. [Ø4.7] stainless steel multi-staked piano hinge. Structural assembly of body and door components shall
be of welded construction. Door shall be provided with a refill view indicator and be held closed with a tumbler
lock. All exposed surfaces shall be satin finish and be protected during shipment with a PVC film easily
removable after installation.
Surface Mounted Paper Towel Dispenser shall be Model № 0245-SS as manufactured by American
Specialties, Inc. 441 Saw Mill River Road Yonkers, New York 10701-4913
INSTALLATION
Unit is surface mounted on wall or partition using № 10 self-tapping screws (by others).
OPERATION
Towels are self-feeding until supply is depleted. Unit may be reloaded with a partial load in-place and will
continue to feed properly. Low level of towel supply is indicated from 30% capacity to approximately 15% level.