Specifications Sheet

ISSUED:
REVISED:
MODEL No:
Accessory Specialties AMERICAN DISPENSER D esert R ay P roducts ,INC.
THIS MANUFACTURER RESERVES THE RIGHT TO MAKE CHANGES IN DESIGN OR DIMENSIONS WITHOUT FORMAL NOTICE
1-87
0462-AD9
9-04
SURFACE MOUNTED PAPER TOWEL DISPENSER AND WASTE RECEPTACLE
AMERICAN SPECIALTIES, INC.
441 Saw Mill River Road, Yonkers, NY 10701 [phone]
SPECIFICATION
Surface Mounted Paper Towel Dispenser and Waste Receptacle shall hold and dispense 475 standard multi-fold or (350) standard C-
fold paper towels and shall have a waste capacity of 2 gal. (7.6 liters). Door and cabinet shall be fabricated of alloy 18-8 stainless
steel, type 304, 22 gauge; all exposed surfaces shall have N
o
4 satin finish and be protected during shipment with a PVC film that shall
be easily removable after installation. Door shall be of double-pan construction with fiberboard filler and shall be attached to cabinet
at side with a full length 3/16′′ dia. stainless steel multi-staked piano hinge and shall be held closed with a tumbler lock keyed alike
to other ASI washroom equipment. Towel dispensing slot shall have a fully deburred edge for snag-free dispensing and user safety.
Waste receptacle shall have hemmed edges and a rolled-edge finger-hole for ease of service removal and maintenance safety.
Structural assembly of body and door components shall be of welded construction. Unit shall be supplied with SM collar to convert
to surface mounting.
Surface Mounted Paper Towel Dispenser and Waste Receptacle shall be Model N
o
0462-AD9 as manufactured by American
Specialties, Inc., 441 Saw Mill River Road Yonkers, New York 10701-4913
INSTALLATION
Unit is surface mounted to wall using N
o
10 self tapping screws (by others) through concealed mounting holes provided. For
compliance with ADA Accessibility Guidelines, unit should be installed so that towel dispenser slot is 54" (1372mm) maximum
above finished floor (AFF) if clear floor side reach access is provided or 48" (1219mm) maximum AFF if clear floor forward reach
access only is provided. SM collar is installed on cabinet prior to mounting on wall following procedure described on SM Collar
Data Sheet.
OPERATION
Towels are self-feeding until supply is depleted. Unit may be reloaded with a partial load in-place and will continue to feed properly.
Waste container is emptied manually on cycle determined by maintenance needs.