Specifications Sheet

AMERICAN SPECIALTIES, INC.
441 Saw Mill River Road, NY 10701
[phone] • [phone]
www.americanspecialties.com
THIS MANUFACTURER RESERVES THE RIGHT TO MAKE CHANGES IN DESIGN OR DIMENSIONS WITHOUT FORMAL NOTICE
FIXED ANGLE TILTED MIRROR
MODEL №: 0535
ISSUED: 01/87
REVISED: 19 FEB 2018
SPECIFICATION
Fixed Angle Tilted Mirror shall be fabricated of alloy 18-8 stainless steel, type 304, 20 gauge. Face shall be one piece construction free of
miters or spot welded seams. All exposed surfaces shall have No 4 satin finish and be protected during shipment by plastic PVC film easily
removable after installation. Concealed tamper resistant locking devices shall be provided. Mirror shall be _______(INSERT GLAZING OP-
TION) and shall be warranted for 15 years against silver spoilage. Mirrors shall be supplied as standard with glazing option ‘ A ´. For a com-
plete description and other choices of glazing options, see the Mirror Glazing OPTIONS Chart.
Fixed Angle Tilted Mirror shall be Model No 0535-_______ (insert glazing option) - _____(insert size code) manufactured by Ameri-
can Specialties, Inc., Yonkers, NY 10701-4913.
INSTALLATION
Unit is surface mounted on wall or partition using four (4) No 10 self tapping screws (by others). Mounting holes through back are “keyhole”
slots for hanging unit on pre-installed screws. Unit requires 5/8″(16mm) clearance at top to engage screws in keyhole slots. For compliance
with 2010 ADA Accessibility Standards, bottom of reflecting surface should be installed 40" (1016mm) max. above finished floor.
AVAILABLE MODELS
MODEL №
DIMENSIONS
W H HW HH
0535-____-1630
16" (406mm) 30"(762mm) 15"(381mm) 19-1/2"(495mm)
0535-____-1824
18″ (457mm) 24″(610mm 17″ (432mm) 13-1/2″(343mm
0535-____-1830
18″ (457mm) 30″(762mm 17″ (432mm 19-1/2″(495mm)
0535-____-1836
18″ (457mm) 36″(914mm) 17″ (432mm) 25-1/2″(648mm
0535-____-2430
24″ (610mm) 30″(762mm) 23″ (584mm) 19-1/2″(495mm)
0535-____-2436
24″ (610mm) 36″(914mm) 23″ (584mm) 25-1/2″(648mm)