Specifications Sheet

ISSUED:
REVISED:
MODEL No:
Accessory Specialties AMERICAN DISPENSER D esert R ay P roducts ,INC.
THIS MANUFACTURER RESERVES THE RIGHT TO MAKE CHANGES IN DESIGN OR DIMENSIONS WITHOUT FORMAL NOTICE
1-87
SURFACE MOUNTED SHELF AND DUAL TOILET PAPER HOLDER
AMERICAN SPECIALTIES, INC.
9-04
441 Saw Mill River Road, Yonkers, NY 10701 [phone]
0697-GAL
SPECIFICATION
Surface Mounted Shelf & Dual Toilet Paper Holder shall hold two (2) 5′′ (127mm) dia. rolls of 1500 sheets or standard toilet paper
rolls and shall have 5" x 18" (127mm x 457mm) shelf with 5/8" (16 mm) hemmed lip on front edge. All metal parts shall be
fabricated of type 304, 18-8 alloy stainless steel, 18 gauge; all exposed surfaces shall have N
o
4 satin finish and shall be protected
during shipping by a PVC film easily removed after installation. Structural assembly of shelf and brackets/roll supports shall be of
welded construction. Rollers shall be molded of high impact-resistant polystyrene plastic and two (2) shall be supplied.
Surface Mounted Shelf & Dual Toilet Paper Holder shall be Model N
o
0697-GAL as manufactured by American Specialties,
441 Saw Mill River Road, Inc., Yonkers, NY 10701-4913
INSTALLATION
Unit is surface mounted on wall or partition using N
o
10 self tapping screws (by others) through holes provided in support brackets.
For compliance with ADA Accessibility Guidelines unit should be installed so that centerline of roller is 44′′ (1118mm) maximum
above finished floor (AFF) and 19′′ (483mm) minimum AFF. Recommended mounting height for general utility is 32" (813mm)
to 36" (914mm) AFF.
OPERATION
Toilet paper rolls are self-feeding on user-pull demand until supply is depleted. Rollers are spring loaded and are free-rolling.