Specifications Sheet

AMERICAN SPECIALTIES, INC.

441 Saw Mill River Road, Yonkers, NY 10701

(914) 476.9000 • (914) 476.0688

www.americanspecialties.com

THIS MANUFACTURER RESERVES THE RIGHT TO MAKE CHANGES IN DESIGN OR DIMENSIONS WITHOUT FORMAL NOTICE

SURFACE MOUNTED HORIZONTAL BABY CHANGING STATION (PG 1 of 2)

MODEL №: 9014

ISSUED: 08/13

REVISED: 5 Aug 2014

SPECIFICATION

Surface Mounted Baby Changing Station shall be horizontal format and shall protrude no more than 4” (102) from

wall when in retracted position. Unit shall comply with 2010 ADA Accessibility Standards, ASTM F2285-04, and

EN 12221-1. Unit shall support a static load of 300 lbs. (136.1 kg) and be tested in excess of 350 lbs. (158.8 kg).

Unit shall be fabricated of non-porous plastic (FDA approved HDPE) tested according to ASTM G21 and ASTM

G22. No parts of the operating mechanism shall be accessible when unit is open or closed to provide a tamper-

resistant and pinch proof user environment. Unit shall have a damped gas spring to assist user in opening and closing

bed tray with the use of one hand. Unit shall be provided with one integral heavy-duty bag hook. Unit shall provide a

bed-liner dispenser that may be easily converted to a multi-fold towel dispenser with no adapters. Unit shall provide

graphics and instructions in four languages on interior back. Unit shall be provided with an adjustable two-part vinyl

coated child protection safety-strap mounted with concealed fasteners on high walls of cradle. Entire unit shall be as-

sembled of completely sealed components to provide easy cleaning and no penetration zones to harbor microbes or

bacteria. Unit shall mount on standard stud wall dimensions and with proper anchoring may mount on all suitable

wall constructions. Mounting fasteners shall be concealed after installation using color matched recess plug-covers

supplied. Unit shall be light grey in color and shall be recyclable at end of usable life. Unit shall be warranted for five

(5) years against defects in material or workmanship.

Surface Mounted Horizontal Baby Changing Station shall be Model № 9014 as manufactured by American Specialties,

Inc., 441 Saw Mill River Road, Yonkers, NY 10701-4913

PAGE 1
AMERICAN SPECIALTIES, INC. 441 Saw Mill River Road, Yonkers, NY 10701 (914) 476.9000 • (914) 476.0688 www.americanspecialties.com MODEL №: 9014 ISSUED: 08/13 REVISED: 5 Aug 2014 SURFACE MOUNTED HORIZONTAL BABY CHANGING STATION (PG 1 of 2) SPECIFICATION Surface Mounted Baby Changing Station shall be horizontal format and shall protrude no more than 4” (102) from wall when in retracted position. Unit shall comply with 2010 ADA Accessibility Standards, ASTM F2285-04, and EN 12221-1.
PAGE 2
AMERICAN SPECIALTIES, INC. 441 Saw Mill River Road, Yonkers, NY 10701 (914) 476.9000 • (914) 476.0688 www.americanspecialties.com MODEL №: 9014 ISSUED: 08/13 REVISED: 5 Aug 2014 SURFACE MOUNTED HORIZONTAL BABY CHANGING STATION (PG 2 of 2) INSTALLATION Installation instructions along with operation and maintenance manual are provided with each unit. Unit is surface mounted using hardware supplied through recessed mounting holes.