Installation Sheet

AMERICAN SPECIALTIES, INC.
441 Saw Mill River Road, Yonkers, NY 10701
[phone] • [phone]
www.americanspecialties.com
MODEL №:
ISSUED:
REVISED:
THIS MANUFACTURER RESERVES THE RIGHT TO MAKE CHANGES IN DESIGN OR DIMENSIONS WITHOUT FORMAL NOTICE
SURFACE MOUNTED STAINLESS STEEL HORIZONTAL BABY CHANGING STATION (Pg 1 of 2)
9018-9
08-13
17 APR 2019
SPECIFICATION
Surface Mounted Stainless Steel Horizontal Baby Changing Station shall protrude no more than 4" [102] from wall
when in retracted position. Unit shall comply with 2010 ADA Accessibility Standards, ASTM F2285-04, and EN
12221-1. Unit shall support a static load of 300 lbs (136,1 kg) and be tested in excess of 350 lbs (158,8 kg). Unit
shall be fabricated of non-porous plastic (FDA approved HDPE) tested according to ASTM G21 and ASTM G22.
Unit shall contain a door facing and wall flange dress trim of satin finished 18 gauge [1,2] type 304 stainless steel.
Unit shall contain a surface mounting collar made from satin finished 22 gauge [0,8] type 304 stainless steel. No parts
of the operating mechanism shall be accessible when unit is open or closed to provide a tamper-resistant and pinch
proof user environment. Unit shall have a damped gas spring to assist user in opening and closing bed tray with the
use of one hand. Unit shall be provided with one integral heavy-duty bag hook. Unit shall provide a bed-liner dis-
penser that may be easily converted to a multi-fold towel dispenser with no adapters. Unit shall provide graphics and
instructions in four languages on interior back. Unit shall be provided with an adjustable two-part vinyl coated child
protection safety-strap mounted with concealed fasteners on high walls of cradle. Entire unit shall be assembled of
completely sealed components to provide easy cleaning and no penetration zones to harbor microbes or bacteria. Unit
shall mount on standard stud wall dimensions and with proper anchoring may mount on all suitable wall construc-
tions. Mounting fasteners shall be concealed after installation using color matched recess plug-covers supplied. Unit
bed tray and back shall be light grey in color and entire unit shall be recyclable at end of usable life. Unit shall be
warranted for five (5) years against defects in material or workmanship.
Surface Mounted Stainless Steel Horizontal Baby Changing Station shall be Model № 9018-9 as manufactured
by American Specialties, Inc., 441 Saw Mill River Road, Yonkers, NY 10701-4913
39-5/32"
[994]
28-1/4"
[718]
16"
[406]
13"
[330]
32-5/8"
[829]
BAG HOOK
SAFETY STRAP
27" [686] AFF
30-1/4" [768] AFF
LINERS AND TOWELS
DISPENSER
OPTIONAL
MOUNTING HOLES
WITH PLUG COVERS
SAFETY
INSTRUCTIONS
22-1/16"
[560]
7/8"
[22]
3-15/16"
[100]
45" [1143]
AFF
FINISHED FLOOR
C
L
C
L
C
L
C
L
NOTE:
ALL DIM’S INCH [MM]
ILLUSTRATION FOR REF ONLY AND NTS